SENCO A20 Full Round Head Hand Nailer

Model: sennpc0781
ratings        (4) Write A Review

We’re sorry, but this item is no longer available.

SENCO A20 Full Round Head Hand Nailer Model: sennpc0781

Product Features & specs :

SENCO A20 Full Round Head Hand Nailer

Details
This tool weighs less than 3 lb. and fits into the palm of the hand, making it ideal for joist hangers, metal straps and pole barn assembly. The A20 eliminates the possibility of marred work surfaces that often result from errant hammer blows because slight hand pressure is all that's needed to activate this tool. Leather grip included.
Features:
  • Balanced 2.5 lbs. weight
  • Magnetic nail guide for faster and easier driving
  • Soft rubber palm pad for comfortable grip
  • Leather grip reduces fatigue
  • 1-year warranty
What’s Included:
  • A20, Full Round Head Hand Nailer - PC0781
Fastener Type
Bulk Nails
Fastener Length (Min.)
2 in
Tip Style
Workpiece Contact
Dry Fire Lockout
No
Fastener Length (Max.)
3-1/2 in
Operating Pressure (PSI)
50 - 125
Lubrication
Oil-Lube
Fastener Capacity
1
Magazine Angle
Straight
Air Inlet Size
3/8 in
Firing Modes
Contact Actuation
Fitting Type
NPT
Fastener Gauge
other
Average Air Consumption (SCFM)
4
Fastener Collation
Single Collation
Depth of Drive
Fixed
Magazine Type
Single Load
Length
4 in.
Width
3.25 in.
Height
5.8 in.
Weight
2.4 lbs.

Reviews :

5.0 / 5.0
4 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
4
0
0
0
0
Would you recommend this product?
Yes (4)
Pros
Easy To Use (4)
Powerful (4)
Best Uses
Home Repair (2)
Would you recommend this product?
Yes
Pros
Easy To Use
Powerful
one of the best tools ever made!!!!!
you can drive a 16 penny nail in about 2 to 3 seconds they are so nice in tight ereas.

The first time I ever used one I was amazed on how well it worked with no conpaints. Buy it, you won't regreat it!!!!
December 9, 2013
Would you recommend this product?
Yes
Pros
Easy To Use
Powerful
Best Uses
Home Repair
Great tool
Had to get in tight spots where I couldn't swing a hammer.....worked great.
January 16, 2012
Would you recommend this product?
Yes
Pros
Easy To Use
Powerful
Best Uses
Home Repair
Every carpenter should have one !
Purchased one for my remodeling contractor. I've had mine for 10 years. He had never seen or used one, so I let him use mine to nail in a reframed wall in my basement bathroom. The wall was just beneath 2 X10 joists and no room to swing a hammer between the end wall studs.
October 29, 2011
Would you recommend this product?
Yes
Pros
Easy To Use
Powerful
Great for those hard to get at places
Great for installation of joist hangers, working between trusses/overhangs---any tight quarters! Also great for installing pole barn spikes.
August 20, 2009

Q & A :

Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 3 questions Browse 3 questions and 5 answers
CAN IT BE USED FOR DRIVING SCREWS OR BOLTS?
Buzz on Feb 23, 2015
BEST ANSWER: This unit is only intended to drive full round head nails.
Is this product made in the USA
Finger on Nov 25, 2012
BEST ANSWER: Currently this product is not manufactured in the USA.
My palm nailer leaks lots of air. Is there a rebuild kit available or a service center to repair this device? What is the estimated cost of repair?
bill on Nov 4, 2014
BEST ANSWER: Please contact Senco directly at 800-543-4596 for a repair kit that works with your palm nailer.

Warranty:

Limited Warranty SENCO® Pneumatic, DuraSpin®, Cordless Tools & Compressors

Senco Products, Inc. ("SENCO") designs and constructs its products using the highest standards of material and workmanship. SENCO warrants to the original retail purchaser that the following products will be free from defects in material or workmanship for the warranty period specified below:


SENCO® XP Series-Red Cap
SENCO PRO Series


SENCO® XP Series-Black Cap
SENCO Cordless
SENCO FP502
Gas Cordless
Tyrex Concrete Tools


SENCO Compressors
SENCO DuraSpin®
SENCO Reconditioned Products
Tyrex Tools


During the warranty period (which begins on the purchase date), SENCO will repair or replace, at SENCO's option and expense, any product or part that is defective in materials or workmanship after examination by a SENCO Authorized Warranty Service Center, subject to the exceptions, exclusions and limitations described below. Any replacement product or part will carry a warranty for the balance of the warranty period applicable to the replaced product or part. A DATED SALES RECEIPT OR PROOF OF PURCHASE FROM THE ORIGINAL RETAIL PURCHASER IS REQUIRED TO MAKE A WARRANTY CLAIM. Product registration can be accomplished through on-line Product Registration at www.senco.com or by completing and returning the postage paid product registration form included with your Operator's manual/parts chart information, found inside the product carton. To make a warranty claim, you must return the product, with proper receipt/proof of purchase and return transportation charges prepaid, to a SENCO Authorized Warranty Service Center. A list of SENCO Authorized Warranty Service Centers can be found at www.senco.com or by calling 1-800-543-4596 toll free. SENCO will perform its obligations under this warranty, within a reasonable time after approval of the warranty claim.


Wheelbarrow Compressors:

  • Subject to the exceptions, exclusions and limitations described below, SENCO warrants that the compressor pump will be free from defects in materials and workmanship for two years after the purchase date.
  • Defective parts of the compressor pump not subject to normal wear and tear will be repaired or replaced, at SENCO's option, during the two year warranty period. If SENCO determines that repair or replacement is not feasible, SENCO will refund the purchase price less reasonable depreciation based on actual use.

SENCO Cordless:

  • Subject to the exceptions, exclusions and limitations described below, SENCO warrants that the SENCO Cordless tool will be free from defects in materials and workmanship for two years after the purchase date.
  • Subject to the exceptions, exclusions and limitations described below, SENCO warrants that the batteries and chargers used with SENCO Cordless tools will be free from defects in material and workmanship for one year after the purchase date.

WARRANTY EXCLUSIONS

The following warranty exclusions apply:

  • Normal wear parts are not covered under this warranty. Normal wear parts include, for example, isolators, drive belts, air filters, rubber o-rings, seals, driver blades, piston stops, piston/driver assembly, and fuel stems.
  • This warranty does not cover parts damaged due to normal wear, misapplication, misuse, accidents, operation at other than recommended speeds or voltage (electric units only), improper storage, or damage resulting during shipping.
  • Products used in production/industrial applications as defined by SENCO are excluded from this warranty.
  • Labor charges or loss or damage resulting from improper operation, maintenance or repairs are not covered by this warranty.
  • SENCO does not warrant the Wheelbarrow Compressor Engine/Motor, but the Compressor Engine/Motor may be covered under a warranty offered by its manufacturer.

GENERAL WARRANTY CONDITIONS

This warranty will be honored, only if:

  • Clean, dry, regulated compressed air has been used, at air pressure not exceeding the maximum indicated on the tool casting;
  • No evidence of abuse, abnormal conditions, accident, neglect, misuse or improper modifications or storage of the product; and
  • No Deviation from operating instructions, specifications, and maintenance schedules exists (read Operator Manual for use, specifications, and maintenance instructions).

THIS WARRANTY IS THE ONLY WARRANTY ON THE PRODUCT, AND SENCO DISCLAIMS ALL OTHER WARRANTIES. ANY IMPLIED WARRANTIES WILL BE LIMITED IN DURATION TO THE APPLICABLE WARRANTY PERIOD SPECIFIED ABOVE. SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU. YOUR REMEDIES ARE SOLELY AND EXCLUSIVELY AS STATED ABOVE. SENCO SHALL IN NO EVENT BE LIABLE FOR INCIDENTAL, CONSEQUENTIAL, INDIRECT, OR SPECIAL DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU. IN NO EVENT, WHETHER AS A RESULT OF A BREACH OF CONTRACT, WARRANTY, TORT (INCLUDING NEGLIGENCE) OR OTHERWISE, SHALL SENCO'S LIABILITY EXCEED THE PRICE OF THE PRODUCT WHICH HAS GIVEN RISE TO THE CLAIM OR LIABILITY. ANY LIABILITY CONNECTED WITH THE USE OF THIS PRODUCT SHALL TERMINATE UPON THE EXPIRATION OF THE WARRANTY PERIOD SPECIFIED ABOVE. NO EMPLOYEE OR REPRESENTATIVE OF SENCO OR ANY DISTRIBUTOR OR DEALER IS AUTHORIZED TO MAKE ANY CHANGE OR MODIFICATION TO THIS WARRANTY.


This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.


REPLACEMENT OF TOOL DUE TO NATURAL DISASTER

SENCO will replace any tool destroyed by an Act of God such as flood, earthquake, hurricane or other disaster resulting only from the forces of nature. Such a claim will be honored provided that such original retail purchaser had previously submitted a completed warranty registration card for the tool, and then submits proof of ownership and an acceptable statement describing such Act of God documented by an insurance carrier, police department, or other official governmental source. To obtain instructions for filing a claim call 1-800-543-4596.


CUSTOMER SATISFACTION

One hundred percent customer satisfaction is our #1 goal. If for any reason the product does not perform to the original purchaser's satisfaction, it can be returned to the place of purchase within thirty days with dated sales receipt for a full refund of the purchase price.


TYREX TOOLS AND PARTS WARRANTY:

The length of this guarantee is one year from date of purchase by the original retail purchaser. During this period, DuraSpin Products, LLC, will repair or replace at DuraSpin's option, any original part or parts for the original retail purchaser. This will be done free of charge, provided the parts are determined defective in materials or workmanship upon examination by a DuraSpin Authorized Warranty Service Center (exception: rubber o-rings, seals and bits). Any replacement part provided will carry a warranty for the balance of the period of warranty applicable to the part it replaces.


TYREX CONCRETE TOOLS AND PARTS WARRANTY:


The length of this guarantee is two years from date of purchase by the original retail purchaser. During this period, Rex Commercial Tools and Fasteners, LLC, will repair or replace at Rex's option, any original part or parts for the original retail purchaser. This will be done free of charge, provided the parts are determined defective in materials or workmanship upon examination by a TyRex Authorized Warranty Service Center (exception: batteries). Any replacement part provided will carry a warranty for the balance of the period of warranty applicable to the part it replaces.


This warranty will be honored, only if:
A) No evidence of abuse, or failure to follow recommended operational maintenance, or modification of the tool is present (read Operator Manual for use and maintenance instructions);
B) When repair or replacement of parts or tools is necessary, the original retail purchaser returns the complete tool or part, with transportation prepaid, to the nearest DuraSpin Products, LLC Authorized Warranty Service Center, with purchase receipt or other positive proof that the part or tool is within the warranty period.

THIS WARRANTY IS THE ONLY WARRANTY ON THIS TOOL, AND ALL OTHER WARRANTIES, WHETHER ORAL, WRITTEN, EXPRESS, OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE EXCLUDED. BUYER'S OR USER'S REMEDIES ARE SOLELY AND EXCLUSIVELY AS STATED ABOVE. DuraSpin Products, LLC SHALL IN NO EVENT BE LIABLE FOR INCIDENTAL, CONSEQUENTIAL, INDIRECT, OR SPECIAL DAMAGES. IN NO EVENT, WHETHER AS A RESULT OF A BREACH OF CONTRACT, WARRANTY, TORT (INCLUDING NEGLIGENCE) OR OTHERWISE, SHALL DURASPIN'S LIABILITY EXCEED THE PRICE OF THE TOOL WHICH HAS GIVEN RISE TO THE CLAIM OR LIABILITY. ANY LIABILITY CONNECTED WITH THE USE OF THIS TOOL SHALL TERMINATE UPON THE EXPIRATION OF THE WARRANTY PERIOD SPECIFIED ABOVE.


Replacement of Tool Due to Natural Disaster

DuraSpin Products, LLC will also replace any tool destroyed by an Act of God such as flood,earthquake, hurricane or other disaster resulting only from the forces of nature. Such a claim will be honored provided that such original retail purchaser had previously submitted a completed warranty registration card, and then submits proof of ownership and an acceptable statement describing such Act of God documented by an insurance carrier, police department, or other official governmental source. To obtain instructions for filing a claim call 1-800-396-3318. DuraSpin Products, LLC CINCINNATI, OHIO 45245-1213 USA