The SeekTech Inductive Clamp allows users to apply a signal to a cable or pipe that is 4 in. or less in diameter when it is not possible to connect transmitter leads directly to the target conductor. When its jaws are closed around a cable or pipe, the clamp couples the transmitted signal onto the conductor by induction. Once the signal is applied to a conductor, it can be traced using a compatible receiver, such as the SeekTech SR-20 or SR-60.
Any SeekTech Line Transmitter (e.g., ST-33Q, ST-510,ST-305) or comparable line transmitter which has a 10 watt or less maximum output power if frequency is under 45kHz, and a 1 watt maximum if above 45kHz can be used as a power source. The line transmitter must be jackplug compatible. The clamp may be used with line transmitter frequencies of 8kHz to 262kHz.
Allows users to apply a signal to a cable or pipe when direct connection is not possible
Compatible with all RIDGID transmitters