The NOVA 9020 7/8 in. Flexible Point Drive Center has an innovative design which is popular amongst spindle turners. The ?Flexible Point? spring-loaded center point allows you to set your workpiece in place (or remove it) with the lathe turning. Your workpiece spins when you increase tailstock pressure and the drive center teeth bite into the wood. With light pressure, it will drive your work, but allows it to stop if you have a catch, minimizing damage to your workpiece. With increased pressure, it will power through even the heaviest cuts. Since its multiple teeth spread the pressure over a larger area, the Flexible Point drive center is less likely to split your workpiece than a standard spur. This unit is backed by a full replacement 2-year warranty from Teknatool International, since 1955.
- Spring loaded center pin
- Made to fit into the jaws of a chuck
- Eliminates the need to remove the chuck
- Fits neatly with NOVA's four jaw chuck
- 7/8 in. Flexible Point Drive Center - 9020
Compliance and Restrictions
Drilling, sawing, sanding or machining wood products can expose you to wood dust, a substance known to the State of California to cause cancer. Avoid inhaling wood dust or use a dust mask or other safeguards for personal protection. For more information go to www.P65Warnings.ca.gov/wood.