Milwaukee 2855P-22 M18 FUEL Lithium-Ion Brushless Compact 1/2 in. Cordless Impact Wrench Kit with Pin Detent (5 Ah)Milwaukee Model: miln2855p-22
Last 7 In Stock
Product Features & specs :
Milwaukee 2855P-22 M18 FUEL Lithium-Ion Brushless Compact 1/2 in. Cordless Impact Wrench Kit with Pin Detent (5 Ah)
Complete jobs faster with the Milwaukee 2855P-22 M18 FUEL 1/2 in. Compact Impact Wrench with Pin Detent. By delivering up to 250 ft-lbs. of breakaway torque, this cordless impact wrench has all the power users need to drive and loosen common fasteners. At only 4.9 in. in length, users can remove stubborn and rusted fasteners in tight spaces, while the three onboard LED lights illuminate hard to see spaces. 4-Mode DRIVE CONTROL gives users the ability to cycle through three pre-set speed settings (0 to 800 RPM / 0 to 1650 RPM / 0 to 2400 RPM). The fourth mode combines the Bolt Removal and Auto Shut-Off features. Bolt Removal delivers maximum power until the fastener breaks loose, after which the tool will automatically slow down for controlled removal of the fastener. Auto Shut-Off delivers a peak of 20 ft-lbs. of torque before stopping in order to prevent overtorque situations. Sockets stay securely on the anvil with the 1/2 in. pin detent, and the premium rubber overmold protects the tool from harsh jobsite conditions.
250 ft-lbs. of breakaway torque tackles common fasteners with ease
Able to fit into tight spaces at only 4.9 in. in length
Three LEDs surround the anvil to illuminate workspaces with minimal shadow
4-Mode DRIVE CONTROL helps users select the RPM and IPM needed for their applications
Bolt Removal mode provides full power to break fasteners loose, then slows down to control removal
Auto Shut-Off mode provides 20 ft-lbs. of fastening torque, shutting the impact off once that torque spec is reached to prevent overtightening
Rated for work in 69kV environments
DRIVE CONTROL Speeds (RPM): 0-900 (Mode 1) / 0-1650 (Mode 2) / 0-2400 (Mode 3) / 0-2400 (Bolt Removal Mode)
DRIVE CONTROL Impacts (IPM): 0-1000 (Mode 1) / 0-2400 (Mode 2) / 0-3500 (Mode 3) / 0-3500 (Auto Shut-Off Mode)
Compatible with all M18 REDLITHIUM batteries
M18 FUEL 1/2 in. Compact Impact Wrench with Pin Detent - 2855P-20
(2) M18 REDLITHIUM XC5.0 Extended Capacity 5 Ah Lithium-Ion Battery Pack - 48-11-1850
M18 / M12 Multi-Voltage Lithium-Ion Battery Charger - 48-59-1812
Blow-Mold Carrying Case
Battery 2 Amp Hour
Variable Speed Trigger
No-Load Speed (RPM)
No-Load Speed (IPM)
Maximum Speed (RPM)
900 / 1650 / 2400 / 2400
Battery Amp Hour
Q & A :
The warranty period for V28, M12 and M18 Li-Ion Battery Packs is two (2) years from the date of purchase. XC M18 Battery packs carry a (3) year warranty. The warranty period for Ni-Cd Battery Packs, Flashlights, Radios, and Professional Hoists (lever, chain, and electric) is one (1) year from the date of purchase.
*The warranty period for Portable Generators is two (2) years from the date of purchase.
THE REPAIR AND REPLACEMENT REMEDIES DESCRIBED HEREIN ARE EXCLUSIVE. IN NO EVENT SHALL MILWAUKEE BE LIABLE FOR ANY INCIDENTAL, SPECIAL, OR CONSEQUENTIAL DAMAGES, INCLUDING LOSS OF PROFITS.
THIS WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES, OR CONDITIONS, WRITTEN OR ORAL, EXPRESSED OR IMPLIED FOR MERCHANTABILITY OR FITNESS FOR PARTICULAR USE OR PURPOSE.
This warranty gives you specific legal rights. You may also have other rights that vary from state to state and province to province. In those states that do not allow the exclusion of implied warranties or limitation of incidental or consequential damages, the above limitations or exclusions may not apply to you. This warranty applies to the United States, Canada, and Mexico only.
Please call Milwaukee Electric Tool Corporation for warranty questions at 800-729-3878