Makita XNJ01T 18V LXT 5.0 Ah/ 16 Gauge Cordless Lithium-Ion Nibbler Kit

Model: mktnxnj01t
        (1) Write A Review

This item is temporarily out of stock. Want an email when it’s back in stock?

OUT OF STOCK
CA Residents
Prop 65 Warning
compliance warning icon
WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the State of California to cause cancer, birth defects or other reproductive harm. Some examples of those chemicals are: lead from lead-based paints, crystalline silica from bricks and cement and other masonry products, and arsenic and chromium from chemically-treated lumber. Refer to product manual/instructionsCancer
Makita XNJ01T 18V LXT 5.0 Ah/ 16 Gauge Cordless Lithium-Ion Nibbler Kit Model: mktnxnj01t

Product Features & specs :

Makita XNJ01T 18V LXT 5.0 Ah/ 16 Gauge Cordless Lithium-Ion Nibbler Kit

Details
Provides contractors with another 18V LXT metal cutting solution. Engineered for cutting corrugate metal roof decking, sheet metal, and stainless steel, and it will do the job without the cord. Ideal for metal roofing and decking contractors, HVAC, and metal fab shop work. Part of Makita s expanding 18V lithium-ion series, the world s largest cordless tool system powered by an 18V lithium-ion slide-style batteries. Makita 18V lithium-ion batteries have the fastest charge times in their categories, so they spend more time working and less time sitting on the charger. For improved tool performance and extended battery life, Makita created Star Protection Computer Controls . Star Protection is communication technology that allows the Star Protection-equipped tool and battery to exchange data in real time and monitor conditions during use to protect against overloading, over-discharging and overheating. For increased versatility, the tool can also be powered by Makita 18V LXT  and Compact lithium-ion batteries with the star symbol on the battery indicating Star Protection inside. Powered by a Makita-built motor that delivers 1,900 strokes-per-minute (SPM) for fast and smooth cutting. The die holder rotates 360 degrees  to meet the demands of the cutting direction, with a cutting radius of 1 in. (inner edge) and 2 in. (outer edge). When cutting, the metal chips are conveniently disposed below the cutting material, which helps prevent damage to the work surface.
Features:
  • Makita-built motor delivers 1,900 SPM for faster and smooth cutting.
  • Ideal for cutting roofing sheet metal at thicknesses up to 16 gauge
  • Die holder rotates 360 degrees  to meet demands of cutting direction
  • Convenient chip disposal is below cutting material to minimize damage to cutting surface
  • Cutting radius: inner edge 1 3/4 in.; outer edge 2 in
  • Battery capacity warning system turns light solid red and automatically stops motor to notify user that battery needs to be replaced
  • Anti-restart protection prevents motor start up when battery is inserted with switch locked on
  • Rubberized soft grip for improved comfort
  • Lock-on sliding switch for continuous operation
  • Built-in thickness gauge for convenience
What’s Included:
  • Punch (A-83951)
  • Spanner Wrench (781028-4)
  • (2) 18V LXT  Lithium-Ion 5Ah Battery (BL1850B)
  • 18V LXT  Lithium-Ion Rapid Optimum Charger (DC18RC)
  • Tool Bag
Cordless
Yes
Length
12.5 in.
Width
22.5 in.
Height
11.5 in.
Weight
13.3 lbs.
Batteries Included
2
Battery Amp Hour
5 Ah
Battery Type
Li-Ion
Battery Warranty
3 Year
Bluetooth Compatibility
No
CSA Safety
No
Case Included
Yes
Case Type
Bag
Charger Included
Yes
Cutting Capacity (Aluminum)
12 Gauge
Cutting Capacity (Mild Steel)
16 Gauge
Cutting Capacity (Stainless Steel)
18 Gauge
ETL Safety
No
Inner Cutting Radius (Min.)
1-3/4 in
Motor Type
Brushed
Operating Speed (SPM)
1900
Power Source
Cordless
UL Safety
Yes
Voltage
18V
Wifi compatibility
No

Reviews :

5.0 / 5.0
2 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
2
0
0
0
0
Would you recommend this product?
Yes (2)
Pros
Easy To Use (2)
Powerful (2)
Battery Longevity (if applicable) (2)
Ergonomic Design (1)
Cons
Loud (1)
Best Uses
Frequent Use (2)
Large Projects (2)
Small Projects (2)
Jobsite (2)
Would you recommend this product?
Yes
Pros
Easy To Use
Powerful
Battery Longevity (if applicable)
Cons
Loud
Best Uses
Frequent Use
Large Projects
Small Projects
Home Repair
Jobsite
Can't live without it.
If you are working on metal roofing this will be the tool you will wonder how you ever lived without. It follows contours really well. The ability to turn the head really helps. The batteries hold up to a full day of roofing.
February 21, 2018
Purchased
over 2 years ago
Describe Yourself:
Avid Do-it-Yourselfer
Would you recommend this product?
Yes
Pros
Easy To Use
Ergonomic Design
Powerful
Value
Battery Longevity (if applicable)
Lightweight
Best Uses
Frequent Use
Heavy Duty Requirements
Large Projects
Small Projects
Jobsite
A must have for everyone in the metal siding industry
Very useful tool for anyone using metal siding. I use it regularly for cutting out center panels on metal sheets where I would use snips.
December 1, 2017
Describe Yourself:
Professional

Q & A :

Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 1 question Browse 1 question and 1 answer
How much for the punch and die?
Clayton B on Apr 5, 2019
BEST ANSWER: Makita A-83951 Replacement Punch for JN1601 Metal Nibbler is listed at $32.99. The Makita A-15051 Replacement Die for JN1601 Metal Nibbler is listed at $21.99. The link to view the products will be attached below:

Die - https://www.cpooutlets.com/makita-a-15051-replacement-die-for-jn1601-metal-nibbler/mktna-15051,default,pd.html

Punch - https://www.cpooutlets.com/makita-a-83951-replacement-punch-for-jn1601-metal-nibbler/mktna-83951,default,pd.html