JET JJP-10BTOS B3NCH 10 in. Benchtop Planer/Jointer Combo

JET Model: jetn707410
ratings        (27) Write A Review

This item is temporarily out of stock. Want an email when it’s back in stock?

OUT OF STOCK
CA Residents
Prop 65 Warning
compliance warning icon
WARNING: This product can expose you to Lead, which is known to the State of California to cause Cancer and Birth Defect/Reproductive Harm. For more information go to www.P65Warnings.ca.gov.
JET JJP-10BTOS B3NCH 10 in. Benchtop Planer/Jointer Combo JET Model: jetn707410

Product Features & specs :

JET JJP-10BTOS B3NCH 10 in. Benchtop Planer/Jointer Combo

Details
Looking for a powerful jointer and planer in your shop or on the go?, Look no further than the new JET, B3NCH 10", Benchtop Jointer/Planer Combo. This powerhouse gives you the 1-2 punch of features usually only found on big floor models. Precision adjustment knobs, a telescoping blade guard, and a large dust port are only a few of the features that make this jointer/planer a must-have for your home shop.
Features:
  • Compact benchtop design fits conveniently in smallshop environments
  • Heavy-Duty 13 Amp motor for various cutting applications
  • Combination benchtop jointer and planer provides a 2-in-1 machine to maximize workspace
  • Oversized, ergonomic knobs provide ease of use and maximum control
  • Rigid steel stand allows bandsaw transition from benchtop to the floor
  • Large aluminum extended fence makes joining stable and precise
  • Planing and joining tables lock to ensure precision cutting
  • Sheet metal outfeed table with height adjustment supports long workpieces and helps reduce snipe
  • Two high speed steel knives for precise, smooth cuts
What’s Included:
  • B3NCH, 10 in. Benchtop Planer/Jointer Combo - 707410
  • Heavy-Duty 13 Amp motor
  • Large aluminum extended fence
  • Telescoping blade guard
  • Two high speed steel knives
  • Sheet metal out feed table
  • Precision ergonomic adjustment knobs
Power Source
Corded
No. of Knives
2
Knife Width
0.65 in
Fence Length
25 in
PreWired Voltage
120V
Amperage
13
UL Safety
No
Knife Thickness
0.06 in
CSA Safety
No
Wifi compatibility
No
Fence Tilt (Front)
45 Degrees
Fence Height
4-7/8 in
Dust Port Size
2-1/2 in / 4 in
Table Dimensions
36 in x 10-1/4 in
Knife Length
10.25 in
Bluetooth Compatibility
No
Cutterhead Speed (RPM)
9000
Motor Phase
1
Planing Capacity (Depth)
5/64 in
Voltage
120V
Motor Type
Brushed
Stock Removal (Max.)
1/8 in
Max. Cut Capacity (Depth)
5/64 in
Max. Cut Capacity (Width)
10 in
Cutterhead Style
Straight Knives
Fence Tilt (Rear)
45 Degrees
Fence Stops
3
Cuts Per Minute (CPM)
18000
ETL Safety
No
Length
37.5 in.
Width
18.5 in.
Height
44 in.
Weight
74 lbs.
Warranty Term
3 Year

Reviews :

3.6 / 5.0
28 Reviews
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
4
15
5
2
2
Would you recommend this product?
Yes (18)
No (3)
Pros
Easy To Use (18)
Powerful (9)
Lightweight (1)
Cons
Not Durable (1)
Loud (1)
Uncomfortable to Use (1)
Best Uses
Frequent Use (1)
Small Projects (1)
Good value for the money.
I needed a jointer that would do at least 8". Not able to justify the expense of a 10 or 12 inch jointer, or have the space for anything larger than the Jet 10", I went with the Jet because it fit my budget and size constraints. I initially had trouble adjusting the fence to 90 degrees because every time I got the fence to 90 deg and then tightened the fence adjuster, it would move slightly.
March 19, 2018
Nice, but just received.
Just received and built. All around very nice. The fence is weak and will need to playing with but does a good job with the little wood I have used so far. Will be running some black Walnut through shortly which will be a huge test. Also building a new workbench for some large Southern Yellow Pine that will put it to the test. The stand is nice. I bought the Jet portable stand which is amazing. One of the best stands I have ever used. Easy to build and rolls very nicely. I will write a follow-up in a month or so.
April 23, 2017
Poor Design, Good Customer Service
After assembly and meticulous cutter-blade alignment (within .002" of the out-feed table) my jointer was still cutting a concave shape into my boards. I found that the out-feed table and in-feed table were more than 1/16" out of coplanar over a two foot span. I contacted Jet and they sent me some alignment instructions that weren't included in the manual.

Unfortunately these instructions just had me loosen the out-feed table mounting bots, rotate the table up or down, and tighten them back down. They aren't actual adjustment points. Also, the adjustment didn't work. Even at it's maximum deflection, I couldn't get the tables coplanar.

Luckily, Jet was very easy to work with. I put everything back in it's package and Jet sent UPS to my house to pick up the package. Jet paid for shipping both ways and provided a full refund.
January 24, 2017
Would you recommend this product?
No
Pros
Lightweight
Cons
Not Durable
Loud
Uncomfortable to Use
Best Uses
Frequent Use
Small Projects
Crap on legs
Run! do not walk away from this land fill. You will find the infeed table will start sagging and you cant correct it as well as a number of things that will annoy you like the belt that burnt in half first day because they neglected to oil the thing at the factory. It made from aluminum and sheet metal and nothing about is straight. If I had the money it would be in the land fill!
January 2, 2017
Describe Yourself:
Avid Do-it-Yourselfer
Would you recommend this product?
Yes
Pros
Easy To Use
Handy machine
I have saw bad reviews on this machine but despite this took my chances a bought one and I'm glad I did it's a very handy machine to have it worked perfectly out of the box it have good power and take up very little room in my shop I have ran black walnut, maple, oak and pine with it and it works well with all no sniping or defects of any kind
January 9, 2016
Would you recommend this product?
Yes
Pros
Easy To Use
nice tool
nice hobby tool
November 14, 2015
Would you recommend this product?
Yes
Pros
Easy To Use
Powerful
It's about what I expectrd
Straighten out not- so-dimensional lumber, it's a breeze to use. Fits into my small garage/shop. Would have really loved a set of locking casters which I added to make the tool fit in the space I have at my disposal. All in all, it's a great value for the money and I'd recommend it to anyone with limited work space.
September 4, 2015
Would you recommend this product?
No
Pros
Easy To Use
B3NCH 10 in. Benchtop Planer/Jointer Combo
I have a Jet jointer which I purchased in 1982. For the new product, I checked "easy to use" (required field) because I haven't used the new product so that makes it real easy. I've only been at this work for 33 years, so forgive my ignorance, but it seems that some products don't measure up, are flimsy, made to poor standards, and don't fit the need of the user. I have a separate machine I use solely for planning. I have several Jet tools and they are all extremely good machines. But I'm wary that a combo will adequately do both tasks as well as individual tools. My point is: the Jet jointer I still have will probably outlive me. This new model doesn't seem to have a long enough in-feed/out-feed table to accommodate my needs. I appreciate Jet for trying to make a good combo which would really be handy. But sometimes shortcuts don't work out very well. And first models have that habit as well. But give them time to get it right and I bet they will. Happy woodworking all.
August 16, 2015
Would you recommend this product?
Yes
Pros
Easy To Use
Powerful
Great product for themoney
I build small furniture projects using hardwoods of questionable width and thickness dimensions and use the planer/ joiner to get the material ready for edge gluing and assembly. The tool adequately performs these operations which saves me time and accurately delivers glue ready materials.
August 15, 2015
Would you recommend this product?
Yes
Pros
Easy To Use
Powerful
A few flaws, but overall a nice machine.
After eagerly opening up my new jointer/planer combo, I undertook the daunting task of assembly. It took me about 2 hours to completely assemble the tool. Overall the directions were easy to follow and the tools that were included as with most items were borderline useless. Get your own wrenches and Alan keys out. It was at this point with my family eager (they could have cared less) that I attempted to start the new tool in the living room. That is when the on/off switch fell apart in my hands. I will attribute this to bad shipping or manufacture defect. I called JET and they promptly shipped me a new one. So with some time on my hands I remembered reading a review of how the machine was shipped out of plane and it took hours to adjust it. So i started checking the machine over with a fine tooth comb (or a straight edge). The fence was off by a slight bit 1/16th of an inch if I had to guess. I loosed the bolts and adjusted it. At this point I found three large burrs on the planer fence. I again called JET and reported what I found, and they are shipping me a new fence now. After checking out the rest of the machine it was all very close to plane or dead on. I had to make a few minor adjustments, but overall that was not terribly difficult. I would say if you are a common weekend garage warrior like myself this machine is perfect. If you are an industrial every day making sawdust kinda guy (or girl) this is probably not for you. The infeed and outfeed beds are a little short causing some sniping on the ends of boards if you are not careful. Overall use and ease of use is nice, Converting from planer to jointer takes me about 2 min, and I am sure less once I get better at it.
February 5, 2015

Q & A :

Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 6 questions Browse 6 questions and 8 answers
Is the only difference between this Model# JETN707410 and Model#: JETN707400 the with of cut (10" vs. 8")? And motor, quality of the table and other components, dust extraction, etc. are all the same?
eviturro on Mar 6, 2013
BEST ANSWER: Yes, these two lathes are basicly the same. Here are some of the differences:
Specs707410707400
Knife Size10" x.65"x.06"8.02"x65"x065
Max. Cutting Width10"8"
Cutting Thickness0.020" -4.72"0.20"-4.90"
Jointer Table Size36"x10-1/4"29"x8-1/4"
Planer Table Size10-3/4" x 10-1/2"10-5/8" x 8-1/2"
Planer Table w/Outfeed19-3/4" x 10-1/2"17-3/4" x 8-1/2"
Fence Size4-7/8" x 25"4-1/8" x 21"
Weight83.8#68.3#
Where can I get a stand for this planner?
joe bob on Oct 9, 2012
BEST ANSWER: You can purchase a stand for this 10-in Benchtop Planer/Jointer Combo from Global Industries. You also purchase this same Planer/Jointer Combo from Amazon.com, with a stand included & free shipping for the same price. Price as this deal.
Just put mine together last night, the Locking Knob "R" (in the manual) on back of machine (closer to center) Does it actually tighten down like the outboard knob (V)?
Mine just spins.
Zeek on Mar 10, 2016
BEST ANSWER: For technical assistance, please call 1-800-274-6848
Have you guys fixed the alignment issues and the warped in feed and out feed tables. And other issues that can be seen on Amazon??? Very interested in buying one but don't want one with the issues I see other people having.. Thank you
Tradesman on Dec 19, 2015
BEST ANSWER: Your question would be best answered by a JET technician (1-800-274-6848)
How to set the fence and table flush and square?
Shawn on Jul 27, 2015
BEST ANSWER: Your question would be best answered by a JET technician (1-800-274-6848)
looks great! how does the planer work? is it a set planer? Just put the board in after adjusting?
bill on Feb 9, 2015
BEST ANSWER: This manual will show you how the Planer works exactly, refer to pages 13-21:

http://content.jettools.com/assets/manuals/707410_man_EN.pdf

Warranty:

JET RED ASSURANCE Program


Do you know about the JET RED ASSURANCE Program? Well, the JET RED ASSURANCE Program was designed to make sure you do! JET has the best and most dependable service in the Industry and they want to make sure you know about it. In addition, to their standard warranty JET offers the Industry's most dependable service and support guarantee. Click here to learn more about what JET RED ASSURANCE can do for you!


5-Year

WARRANTY AND SERVICE

WMH Tool Group, Inc., warrants every product it sells. If one of our tools needs service or repair, one of our Authorized Service Centers located throughout the United States can give you quick service. In most cases, any of these WMH Tool Group Authorized Service Centers can authorize warranty repair, assist you in obtaining parts, or perform routine maintenance and major repair on your JET® tools. For the name of an Authorized Service Center in your area, call 1-800-274-6848.

MORE INFORMATION
This warranty covers any defects in workmanship or materials subject to the exceptions stated below. Cutting tools, abrasives and other consumables are excluded from warranty coverage.

WARRANTY

This JET product carries a limited five-year warranty.

WHAT IS COVERED
This warranty covers any defects in workmanship or materials subject to the exceptions stated below. Cutting tools, abrasives and other consumables are excluded from warranty coverage.

WHO IS COVERED
This warranty covers only the initial purchaser of the product.

WHAT IS THE PERIOD OF COVERAGE
The general JET warranty lasts for the time period specified in the product literature of each product.

WHAT IS NOT COVERED
Five Year Warranties do not cover woodworking (WW) products used for commercial, industrial or educational purposes. Woodworking products with Five Year Warranties that are used for commercial, industrial or education purposes revert to a One Year Warranty. This warranty does not cover defects due directly or indirectly to misuse, abuse, negligence or accidents, normal wear-and-tear, improper repair or alterations, or lack of maintenance.

HOW TO GET SERVICE
The product or part must be returned for examination, postage prepaid, to a location designated by us. For the name of the location nearest you, please call 1-800-274-6848.
You must provide proof of initial purchase date and an explanation of the complaint must accompany the merchandise. If our inspection discloses a defect, we will repair or replace the product, or refund the purchase price, at our option. We will return the repaired product or replacement at our expense unless it is determined by us that there is no defect, or that the defect resulted from causes not within the scope of our warranty in which case we will, at your direction, dispose of or return the product. In the event you choose to have the product returned, you will be responsible for the handling and shipping costs of the return.

HOW STATE LAW APPLIES
This warranty gives you specific legal rights; you may also have other rights which vary from state to state.

LIMITATIONS ON THIS WARRANTY
WMH TOOL GROUP LIMITS ALL IMPLIED WARRANTIES TO THE PERIOD OF THE LIMITED WARRANTY FOR EACH PRODUCT. EXCEPT AS STATED HEREIN, ANY IMPLIED WARRANTIES OR MERCHANTABILITY AND FITNESS ARE EXCLUDED. SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG THE IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU. WMH TOOL GROUP SHALL IN NO EVENT BE LIABLE FOR DEATH, INJURIES TO PERSONS OR PROPERTY, OR FOR INCIDENTAL, CONTINGENT, SPECIAL, OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OF OUR PRODUCTS. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU.

WMH Tool Group sells through distributors only. The specifications in WMH catalogs are given as general information and are not binding. Members of WMH Tool Group reserve the right to effect at any time, without prior notice, those alterations to parts, fittings, and accessory equipment which they may deem necessary for any reason whatsoever.