JET GHB-1340A Lathe with ACU-RITE 200S DRO Installed

JET Model: jetn321122
ratings        (1) Write A Review

Want an email when this item is in stock?

OUT OF STOCK
CA Residents
Prop 65 Warning
compliance warning icon
WARNING: This product can expose you to Lead, which is known to the State of California to cause Cancer and Birth Defect/Reproductive Harm. For more information go to www.P65Warnings.ca.gov.
JET GHB-1340A Lathe with ACU-RITE 200S DRO Installed JET Model: jetn321122

Product Features & specs :

JET GHB-1340A Lathe with ACU-RITE 200S DRO Installed

Details Features:
  • Enclosed gearbox design provides smooth, quiet operation
  • Fast, easy speed changes
  • Hardened and ground gears are featured in the headstock and gearbox
  • D1-4 spindle is precision ground for accuracy and supported by high quality tapered roller bearings
  • Headstock is constantly oiled during operation
  • Gearbox gives wide inch threading and feed capabilities with no gear changes
  • V-way bed design is induction hardened and ground
  • Gap bed design section provided for larger diameter work
  • Independent leadscrew and feed rod
  • Spinde actuation control is apron mounted
  • Compound and cross slide have backlash elimination
  • Adjustable gibs are incorporated in the carriage and slideways
  • Tailstock may be offset for turning tapers and includes an inch-metric graduated quill
What’s Included:
  • GHB-1340A Lathe with ACU-RITE 200S DRO Installed - 321122
  • 6 in. 3-Jaw Direct Mount Chuck with Top Reversing Jaws
  • 8 in. 4-Jaw Chuck
  • 12 in. Face Plate
  • 4-Way Tool Post
  • Steady and Follow Rest
  • Metric Change Gear
  • Splash Guard
  • Centers and Headstock Center Sleeve
  • Threading Dial
  • Tool Box and Tools
Spindle Speed Settings
8
Power Source
Corded
No. of Inch Threads
38
Range of Inch Threads (TPI)
3-1/2 - 80
Spindle Bore Diameter
1-3/8 in
Motor Phase
1
PreWired Voltage
230V
Range of Longitudinal Feed Rates (IPR)
0.0018-0.0374 in
Bed Construction
Cast Iron
Spindle Taper (Tailstock)
MT-3
Cross Slide Travel
6-5/16 in
Horsepower
2
Motor Type
Brushed
Voltage
230V
Spindle Mount Taper
Yes
Carriage Travel
35 in
Spindle Speed Range (RPM)
2000
UL Safety
No
Compound Slide Travel
2-11/16 in
Range of Cross Feeds (IPR)
0.0006 - 0.0130
Range of Metric Threads
0.45 - 10
Swing Range (Gap)
18-3/4 in
CSA Safety
No
Spindle Travel (Tailstock)
3-3/4 in
Distance Between Centers
40 in
Bed Width
7-3/8 in
Steady Rest Capacity
2-3/4 in
Tool Size
5/8 x 5/8 in
No. of Metric Threads
23
Drive Type
Geared Head Clutch
Follow Rest Capcacity
2-3/4 in
No. of Longitudinal Feed Rates
40
No. of Cross Feed Rates
40
Swing Range (Bed)
13 in
Gap Length
8 in
Swing Range (Cross Slide)
7-25/32 in
ETL Safety
No
Spindle Mount
Yes
Length
79 in.
Width
28.5 in.
Height
30 in.
Weight
1154 lbs.
Warranty Term
2 Year

Reviews :

3.0 / 5.0
1 Review
5 Stars
4 Stars
3 Stars
2 Stars
1 Star
0
0
1
0
0
Would you recommend this product?
Yes (1)
Pros
Easy To Use (1)
Powerful (1)
Would you recommend this product?
Yes
Pros
Easy To Use
Powerful
Not as high quailty as I had hoped
Not any better than my 1989 Enco Chinese lathe at almost 3 times the cost.........
January 7, 2016

Q & A :

Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Warranty:

JET RED ASSURANCE Program


Do you know about the JET RED ASSURANCE Program? Well, the JET RED ASSURANCE Program was designed to make sure you do! JET has the best and most dependable service in the Industry and they want to make sure you know about it. In addition, to their standard warranty JET offers the Industry's most dependable service and support guarantee. Click here to learn more about what JET RED ASSURANCE can do for you!


2-Year

WARRANTY AND SERVICE

WMH Tool Group, Inc., warrants every product it sells. If one of our tools needs service or repair, one of our Authorized Service Centers located throughout the United States can give you quick service. In most cases, any of these WMH Tool Group Authorized Service Centers can authorize warranty repair, assist you in obtaining parts, or perform routine maintenance and major repair on your JET® tools. For the name of an Authorized Service Center in your area, call 1-800-274-6848.

MORE INFORMATION
This warranty covers any defects in workmanship or materials subject to the exceptions stated below. Cutting tools, abrasives and other consumables are excluded from warranty coverage.

WARRANTY

This JET product carries a limited two-year warranty.

WHAT IS COVERED
This warranty covers any defects in workmanship or materials subject to the exceptions stated below. Cutting tools, abrasives and other consumables are excluded from warranty coverage.

WHO IS COVERED
This warranty covers only the initial purchaser of the product.

WHAT IS THE PERIOD OF COVERAGE
The general JET warranty lasts for the time period specified in the product literature of each product.

WHAT IS NOT COVERED
Five Year Warranties do not cover woodworking (WW) products used for commercial, industrial or educational purposes. Woodworking products with Five Year Warranties that are used for commercial, industrial or education purposes revert to a One Year Warranty. This warranty does not cover defects due directly or indirectly to misuse, abuse, negligence or accidents, normal wear-and-tear, improper repair or alterations, or lack of maintenance.

HOW TO GET SERVICE
The product or part must be returned for examination, postage prepaid, to a location designated by us. For the name of the location nearest you, please call 1-800-274-6848.
You must provide proof of initial purchase date and an explanation of the complaint must accompany the merchandise. If our inspection discloses a defect, we will repair or replace the product, or refund the purchase price, at our option. We will return the repaired product or replacement at our expense unless it is determined by us that there is no defect, or that the defect resulted from causes not within the scope of our warranty in which case we will, at your direction, dispose of or return the product. In the event you choose to have the product returned, you will be responsible for the handling and shipping costs of the return.

HOW STATE LAW APPLIES
This warranty gives you specific legal rights; you may also have other rights which vary from state to state.

LIMITATIONS ON THIS WARRANTY
WMH TOOL GROUP LIMITS ALL IMPLIED WARRANTIES TO THE PERIOD OF THE LIMITED WARRANTY FOR EACH PRODUCT. EXCEPT AS STATED HEREIN, ANY IMPLIED WARRANTIES OR MERCHANTABILITY AND FITNESS ARE EXCLUDED. SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG THE IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU. WMH TOOL GROUP SHALL IN NO EVENT BE LIABLE FOR DEATH, INJURIES TO PERSONS OR PROPERTY, OR FOR INCIDENTAL, CONTINGENT, SPECIAL, OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OF OUR PRODUCTS. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU.

WMH Tool Group sells through distributors only. The specifications in WMH catalogs are given as general information and are not binding. Members of WMH Tool Group reserve the right to effect at any time, without prior notice, those alterations to parts, fittings, and accessory equipment which they may deem necessary for any reason whatsoever.