JET GH-2680ZH Lathe with Taper Attachment

JET Model: jetn321864
ratings        (0) Write The First Review

This item is temporarily out of stock. Want an email when it’s back in stock?

OUT OF STOCK
CA Residents
Prop 65 Warning
compliance warning icon
WARNING: This product can expose you to Lead, which is known to the State of California to cause Cancer and Birth Defect/Reproductive Harm. For more information go to www.P65Warnings.ca.gov.
JET GH-2680ZH Lathe with Taper Attachment JET Model: jetn321864

Product Features & specs :

JET GH-2680ZH Lathe with Taper Attachment

Details
The JET ZH-Series 4-1/8 in. spindle bore lathe features a clutch operated headstock, universal gearbox, and a rapid traverse on the apron that makes the ZH-Series perfect for high-output production applications. This lathe delivers the features you've come to expect and is backed by the industry-leading JET Two Year Warranty.
Features:
  • 4-1/8 in. bore spindle
  • Clutch operated headstock with all headstock gears hardened and ground
  • Universal gearbox design allows easy selection of inch and metric threading
  • Meehanite Castings are used for added durability.
  • Bed ways are induction hardened and ground for durability.
  • Full Length Splash Guard
  • Heavy-duty tailstock and quill
  • Rapid power traverse to cross slide and carriage
  • Drive Plate
  • 16 in. 4-Jaw Chuck
  • 12 in. 3-Jaw scroll chuck with top reversing jaws
  • Face Plate
  • Steady Rest
  • Follow Rest
What’s Included:
  • GH-2680ZH Lathe with Taper Attachment - 321864
Spindle Speed Settings
12
Power Source
Corded
Range of Inch Threads (TPI)
2 - 30
Spindle Bore Diameter
4-1/8 in
PreWired Voltage
460V
UL Safety
No
Bed Width
16 in
Swing Range (Cross Slide)
16-1/2 in
No. of Inch Threads
48
Bed Construction
Cast Iron
Cross Slide Travel
12-3/32 in
Motor Type
Brushed
Spindle Speed Range (RPM)
1600
Compound Slide Travel
5-1/2 in
Range of Metric Threads
1 - 14
Steady Rest Capacity
25/32 in - 4-29/32 in / 3-15/16 in - 9-7/16 in
No. of Metric Threads
22
Range of Cross Feeds (IPR)
0.010 - 0.0404
Swing Range (Gap)
34 in
CSA Safety
No
Distance Between Centers
80 in
Tool Size
1-1/4 x 1-1/4 in
Gap Length
8 in
Motor Phase
3
Range of Longitudinal Feed Rates (IPR)
0.0023-0.0937 in
Spindle Taper (Tailstock)
MT-5
Horsepower
10
Voltage
230V
Spindle Mount Taper
Yes
Carriage Travel
72-1/2 in
Spindle Travel (Tailstock)
6 in
Drive Type
Geared Head Clutch
Follow Rest Capcacity
25/32 - 3-15/16 in
No. of Longitudinal Feed Rates
65
No. of Cross Feed Rates
65
Swing Range (Bed)
26 in
ETL Safety
No
Spindle Mount
Yes
Length
138 in.
Width
43 in.
Height
57 in.
Weight
8514 lbs.
Warranty Term
2 Year

Reviews :

There are no reviews for this item. Write Review

Q & A :

Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!

Warranty:

JET RED ASSURANCE Program


Do you know about the JET RED ASSURANCE Program? Well, the JET RED ASSURANCE Program was designed to make sure you do! JET has the best and most dependable service in the Industry and they want to make sure you know about it. In addition, to their standard warranty JET offers the Industry's most dependable service and support guarantee. Click here to learn more about what JET RED ASSURANCE can do for you!


2-Year

WARRANTY AND SERVICE

WMH Tool Group, Inc., warrants every product it sells. If one of our tools needs service or repair, one of our Authorized Service Centers located throughout the United States can give you quick service. In most cases, any of these WMH Tool Group Authorized Service Centers can authorize warranty repair, assist you in obtaining parts, or perform routine maintenance and major repair on your JET® tools. For the name of an Authorized Service Center in your area, call 1-800-274-6848.

MORE INFORMATION
This warranty covers any defects in workmanship or materials subject to the exceptions stated below. Cutting tools, abrasives and other consumables are excluded from warranty coverage.

WARRANTY

This JET product carries a limited two-year warranty.

WHAT IS COVERED
This warranty covers any defects in workmanship or materials subject to the exceptions stated below. Cutting tools, abrasives and other consumables are excluded from warranty coverage.

WHO IS COVERED
This warranty covers only the initial purchaser of the product.

WHAT IS THE PERIOD OF COVERAGE
The general JET warranty lasts for the time period specified in the product literature of each product.

WHAT IS NOT COVERED
Five Year Warranties do not cover woodworking (WW) products used for commercial, industrial or educational purposes. Woodworking products with Five Year Warranties that are used for commercial, industrial or education purposes revert to a One Year Warranty. This warranty does not cover defects due directly or indirectly to misuse, abuse, negligence or accidents, normal wear-and-tear, improper repair or alterations, or lack of maintenance.

HOW TO GET SERVICE
The product or part must be returned for examination, postage prepaid, to a location designated by us. For the name of the location nearest you, please call 1-800-274-6848.
You must provide proof of initial purchase date and an explanation of the complaint must accompany the merchandise. If our inspection discloses a defect, we will repair or replace the product, or refund the purchase price, at our option. We will return the repaired product or replacement at our expense unless it is determined by us that there is no defect, or that the defect resulted from causes not within the scope of our warranty in which case we will, at your direction, dispose of or return the product. In the event you choose to have the product returned, you will be responsible for the handling and shipping costs of the return.

HOW STATE LAW APPLIES
This warranty gives you specific legal rights; you may also have other rights which vary from state to state.

LIMITATIONS ON THIS WARRANTY
WMH TOOL GROUP LIMITS ALL IMPLIED WARRANTIES TO THE PERIOD OF THE LIMITED WARRANTY FOR EACH PRODUCT. EXCEPT AS STATED HEREIN, ANY IMPLIED WARRANTIES OR MERCHANTABILITY AND FITNESS ARE EXCLUDED. SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG THE IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU. WMH TOOL GROUP SHALL IN NO EVENT BE LIABLE FOR DEATH, INJURIES TO PERSONS OR PROPERTY, OR FOR INCIDENTAL, CONTINGENT, SPECIAL, OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OF OUR PRODUCTS. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU.

WMH Tool Group sells through distributors only. The specifications in WMH catalogs are given as general information and are not binding. Members of WMH Tool Group reserve the right to effect at any time, without prior notice, those alterations to parts, fittings, and accessory equipment which they may deem necessary for any reason whatsoever.