General International BD7004 4A 2-in-1 Belt & Disc Sander

General International Model: gitnbd7004

Want an email when this item is in stock?

OUT OF STOCK
CA Residents
Prop 65 Warning
compliance warning icon
WARNING: Cancer and Reproductive Harm -- www.P65Warnings.ca.gov
General International BD7004 4A 2-in-1 Belt & Disc Sander General International Model: gitnbd7004

Product Features & specs :

General International BD7004 4A 2-in-1 Belt & Disc Sander

Details
Whoever  said "if you've seen one sander you've seen them all", was wrong. The General international 2-in-1 Belt/Disc Sander was built for versatility with its 0 to 45 degree tilting aluminum work table which can be adjusted for miter polishing. Included with the belt disc sander is a miter gauge for steady sanding on angled edges, an L shaped stop bar for safety and control, and a 2.25 inch dust port to connect a dust extractor. The 16-1/2 in x 4-7/8 in. belt sander tilts to work both horizontally and vertically for grinding and polishing flat surfaces. It has a 6 inch diameter Aluminum disc backing plate. This heavy duty belt sander is made with a solid cast iron base. The BD7004 Belt Disc Sander easily sands, smooths and removes all of the jagged edges and splinters on your wood and lumber. With a 4 amp 1/2 HP motor, users should anticipate enough power to prevent this machine from bogging down under a large load. Changing the spacious 4-inch-by-36-inch belt is a breeze, so you'll have the power to switch and replace sand paper grits as needed without wasting any time. The belt bed adjusts anywhere from 0 to 90 degrees to accommodate the needs of your particular workpiece while the heavy cast-iron base prevents vibrations. With all of this in addition to the 6-inch side disc, you'll have the capacity to sand whatever you need. The sanding disc is accompanied by a sturdy cast-aluminum work table.
Features:
  • Solid cast iron base & housing, steel & aluminum construction, Durable tilting work table with miter gauge
  • 6 in. diameter aluminum disc backing plate
  • 375 W Motor, 120 V ~60Hz, No-load motor speed: 3450 RPM; Amp: 4, HP- 1/2
  • Miter Gauge, 6 in. peel-&-stick sanding disc, 4 in. x 36 in. Sanding belt
  • 2-1/4 in. I.D. dust port, Includes an L-Shaped steel work stop
  • Safety on/off switch with removable key, Quick release system ensures easy belt change
  • ETL Certified, 37.5lbs
  • Manufacturing facilities are certified to ISO9001 & ISO14001 International standards
  • Orbital & Inline Motion, Lock nut tilt, 18 AWG cord gauge, Lever belt tension, #80 sand paper grit, belt table size: 17 in. x 3-7/8 in., table size 6-1/4 in. x 8-3/4 in.
  • <85 dBa
What’s Included:
  • 4A 2-in-1 Belt & Disc Sander
Power Source
Corded
Belt Length
36 in
Sanding Speed (SPM)
1900
Amperage
4
UL Safety
No
CSA Safety
No
Wifi compatibility
No
Belt Width
4 in
Bluetooth Compatibility
No
Horsepower
0.5
Voltage
120V
Motor Type
Brushed
Table Tilt Range
45 Degrees
ETL Safety
Yes
Length
19 in.
Width
16 in.
Height
10 in.
Weight
37 lbs.
Warranty Term
2 Year

Reviews :

Q & A :