In addition to 75 midi size (13.5 oz.) PPS lids with 125 micron filters and 75 liners, this kit also comes with one midi cup and collar, one mix ratio insert, 20 sealing plugs, 1 large standard midi lid dispenser (PN 16299) and 1 large standard midi liner dispenser (PN 16219).
The Paint Preparation System is a complete painting system from 3M which produces cleaner jobs, saves on solvent usage and gun cleaning time, and improves operator efficiency.
PPS replaces traditional mixing cups and filters and drastically reduces the amount of solvent required for gun cleaning. The liner, lid and built-in filter are all disposable, leaving only the adapter and spray gun to be cleaned. It is possible to clean your paint gun with as little as 3 ounces of solvent. With these disposable parts, shops can see a 70% savings in cleaning solvent use, meaning less operator exposure to solvents and reduction in VOCs.
Since PPS uses the same cup for mixing and spraying, there less risk of outside contamination, less time spend mixing and cleaning.
- 75 disposable lids with pre-welded filters and liners for paint mixing, filtering and spraying of coatings including primer, sealer, base coat and clear coat
- 3M PPS has the ability to reduce solvents by up to 70% from traditional gravity cups
- Fast and easy clean up for reduced cycle times
- Ability to spray at all angles (90 degree to the work surface or even upside down) for consistent material transfer which helps reduce overspray, ultimately resulting in lower material consumption
- (75) 13.5 oz. PPS Midi 125 Micron Lids
- (75) Liners
- (1) Midi Cup & Collar
- (1) Mix Ratio Insert
- (20) Sealing Plugs
- (1) Large Standard Midi Lid Dispenser - 16299
- (1) Large Standard Midi Liner Dispenser - 16219