|Blade Diameter:||10 in.|
|Max. Dado Blade Width:||7/16 in.|
|Max. Dado Diameter:||6 in.|
|Max. Depth of Cut at 45 Degrees:||2-9/16 in.|
|Max. Depth of Cut at 90 Degrees:||3-9/16 in.|
|Max. Rip Left of Blade:||11 in.|
|Max. Rip Right of Blade:||30 in.|
|Table Size w/o Extension:||28-1/2 in. x 19 in.|
Reviewed by 4 customers
Displaying reviews 1-4
This is my first Table-saw which means my views cannot be compared to other brands but after looking at many saws within my budget, few seemed to have the feature-rich system which the RK7241S had as standard. I liked especially, the ability to add accessories like a Jointer, which seemed a logical progression from cutting a board, to smoothing an edge. After un-boxing and affixing the blade, I undertook the Blade & Fence alignment, both processes were clearly explained in the booklet instructions, although it's not helpful having to constantly flip to the first few pages, midway through the assembly instructions, to see a pictorial of a given task. The Fence seems sturdy enough and clamps well, it probably will not be as accurate as using another brand's idea of a rack & pinion fence-adjustment. I expect that would mean a substantial increase in product price though. That aside, everything else was a breeze. During initial use, I'd like to offer some points which might be incorporated in future models. To begin with, I feel there should be some spring-loaded casters on the pair of legs below the existing wheels located on the saw-base. I can appreciate I should've set up the saw in the correct location initially, but short of dragging the whole table across the garage floor, which I didn't want to do for fear of distorting the legs, I had to physically lift the whole unit to re-position it or go through the process of closing up and folding down again! Push-down or spring-loaded casters, would obviate that need. I also think there should be a vacuum-port incorporated in future models since whilst some dust falls into the bag beneath the table, the air was thick with fine dust during cutting, which necessitated the use of a filter-mask being worn. This is troublesome because I wear spectacles and breath just steams-up the lens with a mask on! Having a vacuum-port and vacuum attached would again negate this problem. It would also be helpful if the blade-guard assembly was in clear plastic and not smoked because it is unhelpful in not being able to see the wood passing the blade. This leaves the issue with Laser. In my humble & inexperienced mind, the Laser should be fixed beneath the blade-guard so that is illuminates the wood just before it hits the blade. However, all-in-all, this seems to me to be a reasonably competitive and well-equipped saw which, complete with a three year warranty, should provide a bright supportive future if Rockwell stands by their warranty, to enable me to gain experience in Table-saw capability.
Just purchase will work great in my limited space with all the benefits I need
Bought to mainly rip oak boards. Does REAL well. Buy a good name brand and get what you pay for.
the only thing that is alittle off is the slides for the angle cuts is too far from the blade. I will add a piece of wood to the face and extend it.
Do you have questions about this product?
Get answers from real customers and in-house experts with AnswerBox.
Q:How much can the blade height be adjusted? All the literature gives the maximum height, but nothing lists how low you can adjust it.
A:Most cutting depth of any saw in its class at 3-9/16 in, capable of cutting a 4x4 post in one pass
Q:What is the size of Rockwell RK7241s saw folded up ?
A:The Rockwell Table Saw model RK7241S doesn't fold but the fence does. The dimensions without the fence are 28-1/2-in x 19-in.
During the first 30 days after date of purchase, you may exchange a tool which does not work properly due to defects in materials or workmanship by calling our customer service hotline number 866-514-ROCK (7625) to obtain a Return Authorization Number and our Returns Location address. To receive a replacement power tool, you must present a dated proof of purchase and return all original equipment packaged with the original product.
The manufacturer warrants that, for a period of 2 years from the date of purchase, this product shall be free of defects in materials and workmanship. We will repair or replace, at our option, this tool during the warranty period, and we may require that the tool be sent postage prepaid to an approved service center with all original equipment and a dated proof of purchase. Any replacement or repaired power tool will only be covered by the limited warranty for the balance of the warranty period from the date of the original purchase. NOTE: This warranty does not apply to cosmetic imperfections resulting from normal wear and tear.
What is Not Covered
This warranty applies only to the original purchaser at retail and is not transferable. This warranty does NOT cover service or replacement of parts resulting from normal wear. This warranty does NOT cover accessories or battery packs. This warranty does NOT cover malfunction, failure or defects due to:
The manufacturer makes no warranties, representations or promises as to the quality or performance of its power tools other than those specifically stated in this warranty.
Contact our toll-free consumer service line at 1-866-514-7625 to receive a replacement tool or to be directed to an approved service center. When you make a warranty claim or send the tool for warranty service, you must also include a dated proof of purchase.
This warranty is only valid for products purchased and used in the United States of America, its territories or Canada. Any implied warranty granted under state law, including warranties of merchantability or fitness for a particular purpose, are limited to two years from the date of purchase. The manufacturer is not responsible for direct, indirect, incidental or consequential damages including, but not limited to, liability for loss of income arising from the purchase or use of the product. Some states and provinces do not allow limitations on how long an implied warranty lasts and/or do not allow the exclusion or limitation of incidental damages, so the above limitations and exclusions may not apply to you. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state or province to province. The manufacturer declines any responsibility in regards to civil liability arising from abusive use or not in conformity with proper use and maintenance of the machine as described in the operator's manual.
After the purchase, the manufacturer recommends proper maintenance of the machine and to read the operator's manual before using the machine.