|Bevel Capacity:||0 - 45 Degrees|
|Blade Diameter:||4-1/2 in.|
|Depth Of Cut at 45 Degrees:||1-11/16 in.|
|Depth of Cut at 90 Degrees:||1-1/8 in.|
Do you have questions about this product?
Get answers from real customers and in-house experts with AnswerBox.
Q:What is the max cut depth?
A:Husband said about 2 1/2".
A:Not sure of max but it will cut through a 2 X 4.
A:The blade cutting depth is 1"-11/16. I really did not expect much from this
A:The max depth is 1 3/4inch
A:The max depth is 1 3/4inch.
Q:How well does it cut for curved cuts does the saw bind a lot burn the wood if so soon as use the big skill saw. I need to cut a 2X4 on a curve to form the rails for a bridge railing, for looks not for a lot of use. Can it follow the contour lines of the curve without hassle?
A:We would not recommend using a circular saw for making curved cuts. The best option for circular cut would be a jigsaw or a small electric handsaw
A:It is not meant for curves. Great for straight line. Very light.
A:I would suggest you use a good jig saw . This saw will not cut an arc like you are suggesting . Outside will work sort of .. You will have to cut short pieces then run a planer or belt sander to clean it up. Inside cut no way .
A:Not sure for cutting curves with this saw but I've had a lot of experience
A:No, it probably will not be the best saw for this type of work. It has been my experience, that if you cut rounded or crooked, it will bind up the saw, to the point it will stop the blade. It is great for straight cuts though! You would be better off buying a good jigsaw
Q:does it have a Lazar line ?????
A:No, it does not.
A:No, it does not.
A:No, it does not.
A:No, it does not.
Q:Saw went dead at the second cut of its lifetime.
A:For assistance with this issue, please contact Rockwell techs support directly at 866-514-7625
Q:Can this be easily and safely
A:The RK3441K can be used left handed, however, you will have to look over your left hand to view your cutting line. Which can take some getting used to
Q:Is the Rockwell compact saw as advertised 89.99 cordless, if it is not, does Rockwell make a cordless
A:There is free shipping at $99 or more till midnight on 6/16/2015.
Q:does it have blades for cutting metal and ceramic tile
A:Yes,the Rockwell RW9283 4-1/2 in. 60-Grit Diamond Compact Circular Saw Blade is for ceramic tile and the Rockwell RW9282 4-1/2 in. 60T HSS Compact Circular Saw Blade is for metal.
Q:`Can not find blades for my Rockwell rk3441k I need 4.5x3/8 saw blades
A:e-Bay has hundreds of Listings for these blades.
A:Here is a link to Rockwell's site. https://www.rockwelltools.com/en-US/CSS-Blade-RW9281.aspx
A:Any 4.5" with the 3/8" arbor will fill the bill. Bosch & Dewalt come to mind immediately.
During the first 30 days after date of purchase, you may exchange a tool which does not work properly due to defects in materials or workmanship by calling our customer service hotline number 866-514-ROCK (7625) to obtain a Return Authorization Number and our Returns Location address. To receive a replacement power tool, you must present a dated proof of purchase and return all original equipment packaged with the original product.
The manufacturer warrants that, for a period of 2 years from the date of purchase, this product shall be free of defects in materials and workmanship. We will repair or replace, at our option, this tool during the warranty period, and we may require that the tool be sent postage prepaid to an approved service center with all original equipment and a dated proof of purchase. Any replacement or repaired power tool will only be covered by the limited warranty for the balance of the warranty period from the date of the original purchase. NOTE: This warranty does not apply to cosmetic imperfections resulting from normal wear and tear.
What is Not Covered
This warranty applies only to the original purchaser at retail and is not transferable. This warranty does NOT cover service or replacement of parts resulting from normal wear. This warranty does NOT cover accessories or battery packs. This warranty does NOT cover malfunction, failure or defects due to:
The manufacturer makes no warranties, representations or promises as to the quality or performance of its power tools other than those specifically stated in this warranty.
Contact our toll-free consumer service line at 1-866-514-7625 to receive a replacement tool or to be directed to an approved service center. When you make a warranty claim or send the tool for warranty service, you must also include a dated proof of purchase.
This warranty is only valid for products purchased and used in the United States of America, its territories or Canada. Any implied warranty granted under state law, including warranties of merchantability or fitness for a particular purpose, are limited to two years from the date of purchase. The manufacturer is not responsible for direct, indirect, incidental or consequential damages including, but not limited to, liability for loss of income arising from the purchase or use of the product. Some states and provinces do not allow limitations on how long an implied warranty lasts and/or do not allow the exclusion or limitation of incidental damages, so the above limitations and exclusions may not apply to you. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state or province to province. The manufacturer declines any responsibility in regards to civil liability arising from abusive use or not in conformity with proper use and maintenance of the machine as described in the operator's manual.
After the purchase, the manufacturer recommends proper maintenance of the machine and to read the operator's manual before using the machine.