|Chuck Distance to Base:||43-13/32-in|
|Chuck Distance to Table:||24-1/2-in|
|Column Diameter:||3-1/8 in.|
|Net Weight:||246 lbs.|
|Shipping Weight:||250 lbs.|
|Spindle Speed Range:||250 - 3,000 RPM|
|Spindle Taper:||MT2 / JT-33|
|Table Size:||20 in. x 14 in. (L x W)|
REVIEW SNAPSHOT®by PowerReviews
Reviewed by 6 customers
Be sure to insert the worm gear in pinion are of table support before mounting on rack .
Although the table has no slots or holes, I found the K**g clamps will fit in the T-slots to work as hold-downs. The fence provided clamps well into place. L** V*ll*y T-slot clamp plates fit in the T-slots and will carry various clamps too.
Buy a 2MT "green weenie" to prep and maintain the chuck spindle taper hole. That helps ensure minimum runout....
machine works very well. definitely need two people to assemble head on shaft. Instruction manual neglects to inform you of need to insert worm gear before table placement
It is a very good all around drill press. The variable speed works great and for me is a must have. I like the laser guides and they are easy to adjust. The drill press has some well designed quick adjusters to control the depth of quill travel. The LED lights provide very good illumination. The most disappointing thing for me is that the quill travel isn't smooth, doesn't seem to travel through the range smoothly nor retract to the beginning position as sharply as it should. It is overpriced, even when on sale, but at the same time I'm not disappointed except for the way it flows through the six inch range of travel - just doesn't travel through the six inch range with ease and snap back as it should. There is an adjustment, I haven't tried it, suspect it would help some, but doubt that it would truly correct the issue.
I use this machine in my woodworking shop. I had an old Delta 18 in variable speed unit(massive!!!) that somebody loaned me while they had no place to use or store it. This is very close to that unit in power and the depth-stop is even better. It looks great too.
The only place it falls down in in the fence. It is ok, but adjustments are very analog and the hold-down in the slots limit adjustments. But it is included.
The unit is well made and runs great. Best to convert it to 230 volts. Only problem that I had was that the instruction manual was rather brief. It could have included more example and pictures. However a mechanically inclined person could figure it out. With the lasers, I can drill numerous holes in little or not time. I would buy this unit again.
Do you have questions about this product?
get answers from real customers and in-house experts with AnswerBox.
Q:Can the table be moved out of the way for drilling tall work?
A:The work table can be rotated to a full 90 degree position.
Q:What is the difference between the 2800 (I assume older model) and the 2800B?
A:Here are the differences between the 2800 and 2800B:
Q:The web page for the 2800B drill press says only the ONYX version is 90 month warranty. But is the 2800B available in the ONYX edition? Thanks.
A:Unfortunately, the ONYX edition items were only available for a limited time only. They are no longer offered. The warranty on this item is 5 years.
WMH Tool Group, Inc., warrants every product it sells. If one of our tools needs service or repair, one of our Authorized Service Centers located throughout the United States can give you quick service. In most cases, any of these WMH Tool Group Authorized Service Centers can authorize warranty repair, assist you in obtaining parts, or perform routine maintenance and major repair on your POWERMATIC tools. For the name of an Authorized Service Center in your area call 1-800-274-6848.
Five Year Warranty for Non-Industrial Tools
(Vertical Panel Saws, Bandsaws, Jointers, Planers, Planer/Molder, Dust Collection, Disc Sanders, Edge Sanders, Drum Sanders, Shapers, Drill Presses, Mortisers, Dovetailers)
WHAT IS COVERED
This warranty covers any defects in workmanship or materials subject to the exceptions stated below. Cutting tools, abrasives and other consumables are excluded from warranty coverage.
WHO IS COVERED
This warranty covers only the initial purchaser of the product.
WHAT IS THE PERIOD OF COVERAGE
The general POWERMATIC warranty lasts for the time period specified in the product literature of each product.
WHAT IS NOT COVERED
The Five Year Warranty does not cover products used for commercial, industrial or educational purposes. Products with a Five Year Warranty that are used for commercial, industrial or education purposes revert to a One Year Warranty. This warranty does not cover defects due directly or indirectly to misuse, abuse, negligence or accidents, normal wear-and-tear, improper repair or alterations, or lack of maintenance.
HOW TO GET SERVICE
The product or part must be returned for examination, postage prepaid, to a location designated by us. For the name of the location nearest you, please call 1-800-274-6848.
You must provide proof of initial purchase date and an explanation of the complaint must accompany the merchandise. If our inspection discloses a defect, we will repair or replace the product, or refund the purchase price, at our option. We will return the repaired product or replacement at our expense unless it is determined by us that there is no defect, or that the defect resulted from causes not within the scope of our warranty in which case we will, at your direction, dispose of or return the product. In the event you choose to have the product returned, you will be responsible for the handling and shipping costs of the return.
HOW STATE LAW APPLIES
This warranty gives you specific legal rights; you may also have other rights which vary from state to state.
LIMITATIONS ON THIS WARRANTY
WMH TOOL GROUP LIMITS ALL IMPLIED WARRANTIES TO THE PERIOD OF THE LIMITED WARRANTY FOR EACH PRODUCT. EXCEPT AS STATED HEREIN, ANY IMPLIED WARRANTIES OR MERCHANTABILITY AND FITNESS ARE EXCLUDED. SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG THE IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU. WMH TOOL GROUP SHALL IN NO EVENT BE LIABLE FOR DEATH, INJURIES TO PERSONS OR PROPERTY, OR FOR INCIDENTAL, CONTINGENT, SPECIAL, OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OF OUR PRODUCTS. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU.
WMH Tool Group sells through distributors only. The specifications in WMH catalogs are given as general information and are not binding. Members of WMH Tool Group reserve the right to effect at any time, without prior notice, those alterations to parts, fittings, and accessory equipment which they may deem necessary for any reason whatsoever.