|Arbor Size:||5/8 in.|
|Blade Diameter:||10 in.|
|Dust Collection Minimum CFM:||350|
|Dust Port:||4 in.|
|Extension Type:||Cast Iron|
|Max. Dado Blade Width:||13/16 in.|
|Max. Dado Diameter:||8 in.|
|Max. Depth of Cut at 45 Degrees:||2-1/8 in.|
|Max. Depth of Cut at 90 Degrees:||3-1/8 in.|
|Max. Rip Left of Blade:||13-1/2 in.|
|Max. Rip Right of Blade:||50 in.|
|Miter Gauge Type:||Deluxe|
|Motor Type:||Single Phase|
|Motor current:||13 Amp|
|Table Height:||34-1/2 in.|
|Table Size w/ Extension:||42 in. x 30-1/2-in|
|Table Size w/o Extension:||22 in. x 30-1/2 in.|
|Table Type:||Cast Iron|
|Table in Front of Saw Blade at Max. Depth of Cut:||11-1/4 in.|
Reviewed by 1 customer
Displaying review 1
Comments about PM2000 3 HP 10 in. Single Phase Left Tilt Table Saw with 50 in. Accu-Fence, Rout-R-Lift and Riving Knife:
I recently purchased the PM2000 table saw as an upgrade from an $800 table saw I bought 12 years ago and am very happy with the quality and bells and whistles. It's a beautiful machine...with a couple of exceptions. The built in caster system is difficult to use in that it takes quite a number of rotations of the hand wheel to raise/lower the cabinet. It is also very difficult to move the table saw once raised off the floor. I would prefer using locking wheels under the cabinet as well as the table as I used on my old saw. My biggest complaint is with the arbor lock. The first time I switch blades, I learned a hard lesson. The arbor lock is very difficult on my fingers. It must be held in place while removing the arbor nut. I ended up using a screw driver to hold it in place while attempting to remove the very tight arbor nut. The arbor lock bent and is no longer useable. Now I'm out an arbor lock and will use my old tried and true method of removing the arbor nut. I would give the saw a 5 star rating if I could have bought it without the casters and arbor lock. I love the dust collection system! I also love the power and low noise of the motor. The details that powermatic incorporates make using this saw a pleasure to use. Cutting any board, whether maple, ebony or zebra wood, is like cutting butter!
Do you have questions about this product?
Get answers from real customers and in-house experts with AnswerBox.
Q:Can the router lift be upgraded to the Mast-R-Lift II. The lift specified limits the routers that can be used.
A:This question would be better answered by a JET technician. For assistance please call 1-800-274-6848
Q:It appears that the riving knife that comes with the saw is standard kerf thickness and that a thin kerf riving knife can be ordered as an accessory. Is that correct?
A:The saw does come with a standard thickness Knife and you can order a low profile riving knife.
A:Correct, the table saw includes a standard riving knife. Other accessories can be purchased on line at www.powermatic.com.
WMH Tool Group, Inc., warrants every product it sells. If one of our tools needs service or repair, one of our Authorized Service Centers located throughout the United States can give you quick service. In most cases, any of these WMH Tool Group Authorized Service Centers can authorize warranty repair, assist you in obtaining parts, or perform routine maintenance and major repair on your POWERMATIC tools. For the name of an Authorized Service Center in your area call 1-800-274-6848.
Five Year Warranty for Non-Industrial Tools
(Vertical Panel Saws, Bandsaws, Jointers, Planers, Planer/Molder, Dust Collection, Disc Sanders, Edge Sanders, Drum Sanders, Shapers, Drill Presses, Mortisers, Dovetailers)
WHAT IS COVERED
This warranty covers any defects in workmanship or materials subject to the exceptions stated below. Cutting tools, abrasives and other consumables are excluded from warranty coverage.
WHO IS COVERED
This warranty covers only the initial purchaser of the product.
WHAT IS THE PERIOD OF COVERAGE
The general POWERMATIC warranty lasts for the time period specified in the product literature of each product.
WHAT IS NOT COVERED
The Five Year Warranty does not cover products used for commercial, industrial or educational purposes. Products with a Five Year Warranty that are used for commercial, industrial or education purposes revert to a One Year Warranty. This warranty does not cover defects due directly or indirectly to misuse, abuse, negligence or accidents, normal wear-and-tear, improper repair or alterations, or lack of maintenance.
HOW TO GET SERVICE
The product or part must be returned for examination, postage prepaid, to a location designated by us. For the name of the location nearest you, please call 1-800-274-6848.
You must provide proof of initial purchase date and an explanation of the complaint must accompany the merchandise. If our inspection discloses a defect, we will repair or replace the product, or refund the purchase price, at our option. We will return the repaired product or replacement at our expense unless it is determined by us that there is no defect, or that the defect resulted from causes not within the scope of our warranty in which case we will, at your direction, dispose of or return the product. In the event you choose to have the product returned, you will be responsible for the handling and shipping costs of the return.
HOW STATE LAW APPLIES
This warranty gives you specific legal rights; you may also have other rights which vary from state to state.
LIMITATIONS ON THIS WARRANTY
WMH TOOL GROUP LIMITS ALL IMPLIED WARRANTIES TO THE PERIOD OF THE LIMITED WARRANTY FOR EACH PRODUCT. EXCEPT AS STATED HEREIN, ANY IMPLIED WARRANTIES OR MERCHANTABILITY AND FITNESS ARE EXCLUDED. SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG THE IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU. WMH TOOL GROUP SHALL IN NO EVENT BE LIABLE FOR DEATH, INJURIES TO PERSONS OR PROPERTY, OR FOR INCIDENTAL, CONTINGENT, SPECIAL, OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OF OUR PRODUCTS. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU.
WMH Tool Group sells through distributors only. The specifications in WMH catalogs are given as general information and are not binding. Members of WMH Tool Group reserve the right to effect at any time, without prior notice, those alterations to parts, fittings, and accessory equipment which they may deem necessary for any reason whatsoever.