|Arbor Size:||5/8 in.|
|Blade Diameter:||10 in.|
|Blade Tilt Range:||0 - 45 Degrees|
|Dado Blade Diameter (Max.):||8 in.|
|Dado Blade Width (Max.):||13/16 in.|
|Depth of Cut (45 Degrees):||2-1/8 in.|
|Depth of Cut (90 Degrees):||3-1/8 in.|
|Extension Type:||Laminate Table|
|Max. Rip Capacity (Left):||12 in.|
|Max. Rip Capacity (Right):||30 in.|
|No-Load Speed (RPM):||3450|
|Table Clearance (Front of Blade):||11-1/2 in.|
|Table Depth:||27 in.|
|Table Height:||36 in.|
|Table Type:||Cast Iron|
|Table Width:||20-1/8 in.|
|Table Width (w/ Extension):||71-1/4 in.|
|Table Width (w/ Wings):||44-1/4 in.|
|Wing Type:||Cast Iron|
Reviewed by 1 customer
Displaying review 1
Comments about 1-3/4 HP 10 in. Single Phase Left Tilt Table Saw with 30 in. Accu-Fence and Riving Knife:
I purchased this model because I felt it has the best features, quality, and value for under $2000. I would have preferred the cabinet model, like the PM1000, but my shop isn't suited to have the saw permanently placed and I really wanted to keep the cost closer to $1500. I have it on a mobile base, but so far, stability and rigidity have not been an issue. It is also wired to run on 230V which I have found keeps the motor running cool and at a consistent speed.
It easily rips through plywood and solid woods (I've gone as thick as 1.5" so far) and the fence is sturdy and accurate. It took me a few hours to get the saw tuned up out of the box (i.e. assembly, truing/squaring the blade & fence, adjusting the bevel stops, mounting the cast iron wings, etc.), but once that was done, everything has been going great. I thought the really crucial aspects like squaring the blade and fence needed minimal changes from the factory. The miter gauge is surprisingly beefy and has positive stops for making angled cuts. Having the blade run off a belt eliminates wobble and the trunnion appears very solid.
Overall, I think the 64b is the best option for those looking for a professional alternative to a cabinet saw.
Do you have questions about this product?
Get answers from real customers and in-house experts with AnswerBox.
Q:DOES THIS SAW HAVECABINET MOUNTED TRUNNIONS
Q:I am looking for a zero clearance insert for this product measuring 18 7/8 x 3 3/4 x 3/8. Any idea where I can purchase one?
A:Rockler woodworking and hardware has table saw inserts with zero clearance.
A:We do carry a zero clearance insert, but to these specs. You can contact Powermatic directly at 1-800-274-6848. They can assist you.
WMH Tool Group, Inc., warrants every product it sells. If one of our tools needs service or repair, one of our Authorized Service Centers located throughout the United States can give you quick service. In most cases, any of these WMH Tool Group Authorized Service Centers can authorize warranty repair, assist you in obtaining parts, or perform routine maintenance and major repair on your POWERMATIC tools. For the name of an Authorized Service Center in your area call 1-800-274-6848.
Five Year Warranty for Non-Industrial Tools
(Vertical Panel Saws, Bandsaws, Jointers, Planers, Planer/Molder, Dust Collection, Disc Sanders, Edge Sanders, Drum Sanders, Shapers, Drill Presses, Mortisers, Dovetailers)
WHAT IS COVERED
This warranty covers any defects in workmanship or materials subject to the exceptions stated below. Cutting tools, abrasives and other consumables are excluded from warranty coverage.
WHO IS COVERED
This warranty covers only the initial purchaser of the product.
WHAT IS THE PERIOD OF COVERAGE
The general POWERMATIC warranty lasts for the time period specified in the product literature of each product.
WHAT IS NOT COVERED
The Five Year Warranty does not cover products used for commercial, industrial or educational purposes. Products with a Five Year Warranty that are used for commercial, industrial or education purposes revert to a One Year Warranty. This warranty does not cover defects due directly or indirectly to misuse, abuse, negligence or accidents, normal wear-and-tear, improper repair or alterations, or lack of maintenance.
HOW TO GET SERVICE
The product or part must be returned for examination, postage prepaid, to a location designated by us. For the name of the location nearest you, please call 1-800-274-6848.
You must provide proof of initial purchase date and an explanation of the complaint must accompany the merchandise. If our inspection discloses a defect, we will repair or replace the product, or refund the purchase price, at our option. We will return the repaired product or replacement at our expense unless it is determined by us that there is no defect, or that the defect resulted from causes not within the scope of our warranty in which case we will, at your direction, dispose of or return the product. In the event you choose to have the product returned, you will be responsible for the handling and shipping costs of the return.
HOW STATE LAW APPLIES
This warranty gives you specific legal rights; you may also have other rights which vary from state to state.
LIMITATIONS ON THIS WARRANTY
WMH TOOL GROUP LIMITS ALL IMPLIED WARRANTIES TO THE PERIOD OF THE LIMITED WARRANTY FOR EACH PRODUCT. EXCEPT AS STATED HEREIN, ANY IMPLIED WARRANTIES OR MERCHANTABILITY AND FITNESS ARE EXCLUDED. SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG THE IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU. WMH TOOL GROUP SHALL IN NO EVENT BE LIABLE FOR DEATH, INJURIES TO PERSONS OR PROPERTY, OR FOR INCIDENTAL, CONTINGENT, SPECIAL, OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OF OUR PRODUCTS. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU.
WMH Tool Group sells through distributors only. The specifications in WMH catalogs are given as general information and are not binding. Members of WMH Tool Group reserve the right to effect at any time, without prior notice, those alterations to parts, fittings, and accessory equipment which they may deem necessary for any reason whatsoever.