|Arbor Size:||5/8 in.|
|Blade Diameter:||10 in.|
|Dust Collection Minimum CFM:||350|
|Extension Type:||Cast Iron|
|Max. Dado Blade Width:||13/16-in|
|Max. Dado Diameter:||8-in|
|Max. Depth of Cut at 45 Degrees:||2-1/8-in|
|Max. Depth of Cut at 90 Degrees:||3-1/8-in|
|Max. Rip Left of Blade:||12-in|
|Max. Rip Right of Blade:||30-in|
|Motor Current:||15/7.5 Amps|
|Motor Type:||Single Phase|
|Table Size w/ Extension:||40-in x 27-in|
|Table Size w/o Extension:||20-in x 27-in|
|Table Type:||Cast Iron|
|Total Work Surface Area:||57-in x 27-in|
Reviewed by 1 customer
Displaying review 1
Comments about PM1000 1-3/4 HP 10 in. Single Phase 115V Left Tilt Table Saw with 30 in. Accu-Fence System:
In talking with PM Tech Support I got one of the first 100 machines off of the assembly line. I was not disappointed. The machine is perfect.
The packaging was very good and the delivery was outstanding. The unit comes in 4 boxes; Saw, Fence, Motor cover and Fence Rails. The total shipping weight is 420 LBS. I took my time assembling the machine and found the Manual/Instructions very good.
The machine is a new product so some of the accessories like the Dado Insert and thin kerf riving knife are not available yet. I was a little disappointed with that.
Power Requirements - There is a lot of confusion on the power requirements for the saw. The internet and manual quotes it requires a 30amp 110 circuit. This is wrong. The saw comes with a standard 110 plug and works on a dedicated 20amp circuit. I discussed the issue with Powermatic Tech Support and they have corrected the internet manuals and will revise the literature that comes with the saw.
I also purchased the mobile base (JET PART NO.) and it works well with the unit. I did have to cut an inch off of two of the bars and drill two new holes because I wanted the base to fit perfectly to the saw base. If you don't mind an inch gap between the saw base and the mobile base you would not have to alter the base.
CPO Ordering was perfect. The order was placed immediately and I received an electronic confirmation the same day. The saw was delivered directly from the manufacturer in 5 business days. The delivery person rolled the unit into my garage for unpacking. All in all, it was a great experience. Thanks CPO.
Do you have questions about this product?
get answers from real customers and in-house experts with AnswerBox.
Q:What base will work with the PM1000?
A:The model number of the mobile base is 708119.
Q:Which mobile base fits the PM1000 saw?
A:The model number of the mobile base is 708119.
Q:Does the PM1000 have Built-in retractable caster system like the PM2000?
A:No, the PM1000 does not include the retractable casters.
WMH Tool Group, Inc., warrants every product it sells. If one of our tools needs service or repair, one of our Authorized Service Centers located throughout the United States can give you quick service. In most cases, any of these WMH Tool Group Authorized Service Centers can authorize warranty repair, assist you in obtaining parts, or perform routine maintenance and major repair on your POWERMATIC tools. For the name of an Authorized Service Center in your area call 1-800-274-6848.
Five Year Warranty for Non-Industrial Tools
(Vertical Panel Saws, Bandsaws, Jointers, Planers, Planer/Molder, Dust Collection, Disc Sanders, Edge Sanders, Drum Sanders, Shapers, Drill Presses, Mortisers, Dovetailers)
WHAT IS COVERED
This warranty covers any defects in workmanship or materials subject to the exceptions stated below. Cutting tools, abrasives and other consumables are excluded from warranty coverage.
WHO IS COVERED
This warranty covers only the initial purchaser of the product.
WHAT IS THE PERIOD OF COVERAGE
The general POWERMATIC warranty lasts for the time period specified in the product literature of each product.
WHAT IS NOT COVERED
The Five Year Warranty does not cover products used for commercial, industrial or educational purposes. Products with a Five Year Warranty that are used for commercial, industrial or education purposes revert to a One Year Warranty. This warranty does not cover defects due directly or indirectly to misuse, abuse, negligence or accidents, normal wear-and-tear, improper repair or alterations, or lack of maintenance.
HOW TO GET SERVICE
The product or part must be returned for examination, postage prepaid, to a location designated by us. For the name of the location nearest you, please call 1-800-274-6848.
You must provide proof of initial purchase date and an explanation of the complaint must accompany the merchandise. If our inspection discloses a defect, we will repair or replace the product, or refund the purchase price, at our option. We will return the repaired product or replacement at our expense unless it is determined by us that there is no defect, or that the defect resulted from causes not within the scope of our warranty in which case we will, at your direction, dispose of or return the product. In the event you choose to have the product returned, you will be responsible for the handling and shipping costs of the return.
HOW STATE LAW APPLIES
This warranty gives you specific legal rights; you may also have other rights which vary from state to state.
LIMITATIONS ON THIS WARRANTY
WMH TOOL GROUP LIMITS ALL IMPLIED WARRANTIES TO THE PERIOD OF THE LIMITED WARRANTY FOR EACH PRODUCT. EXCEPT AS STATED HEREIN, ANY IMPLIED WARRANTIES OR MERCHANTABILITY AND FITNESS ARE EXCLUDED. SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG THE IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU. WMH TOOL GROUP SHALL IN NO EVENT BE LIABLE FOR DEATH, INJURIES TO PERSONS OR PROPERTY, OR FOR INCIDENTAL, CONTINGENT, SPECIAL, OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OF OUR PRODUCTS. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU.
WMH Tool Group sells through distributors only. The specifications in WMH catalogs are given as general information and are not binding. Members of WMH Tool Group reserve the right to effect at any time, without prior notice, those alterations to parts, fittings, and accessory equipment which they may deem necessary for any reason whatsoever.