Do you have questions about this product?
Get answers from real customers and in-house experts with AnswerBox.
Q:Will this charge the 2656_20 1/4 in impact driver?
A:Yes this should work. I have the same impact driver with the 18 volt li ion batteries and use this charger to recharge them.
A:This charger charges 12v and 18v batteries.
Q:I just purchased a Milwaukee impact driver/drill set with the 48-59-1812 charging station. The first battery pack I plugged in shows a back and forth green / red flashing light... I kept the battery charging for 2 hours (it is properly seated), but there is no change to the charging status (2 bars) and the light is still alternating between red/green. I removed the battery and seated the second battery, which after only a few minutes, showed me a constant green light and 4 bars (fully charged)...
A:The back and forth green to red is telling you the battery you installed
A:constant red is normal charging. blinking could be hot battery or bad
Q:Will this charge the Milwaukee 48-11-1830 V18 18-Volt 3.0 Amp Hour Lithium-Ion Slide Style Battery? Thank you
A:This product charges M18 and M12 Battery Packs.
Q:I am looking at buying the Milwaukee 2890-20 M18 18V Heavy Duty radio and wanted to make sure I am buying the correct charger for the radio. Is the Milwaukee M12/M18 12V/18V Multi-voltage Lithium-ion charger the one I need.
A:Yes the 48-59-1812 would be the correct charger. Also, yes the batteries would need to be purchased as well so you could look at something like model 48-59-1850
Q:Will this work for the 48-11-1850 its the red lithium xc 5.0ha battery
A:It works for all the newer 18 volt batteries as well as the 12Vt batteries.
A:Accepts all M18 and M12 Battery Packs, minimizing the need for extra chargers on the jobsite
A:No this charger do not have the connection for the 1850 batery.
Q:I was wondering if this charger would work for a 28V battery as well the model number for the 28V that I have is 48-11-2830. Will I have to order a charger just for that battery and then one for my other products that are M18 series.
A:No, this is specifically for all M18 and M12 battery packs only.
A:This charger is designed to be used on all Milwaukee all M18 and M12 battery packs only. You will need to have a charger for the 28V batteries. Here is a link to that charger:
Q:I also need the answer to the multi-voltage question. I don't see an answer to the previous 2013 question. I want to purchase this for use in North Africa and while the specifications for the charger state "multi-voltage" does that mean it accepts multi- voltage batteries or is the charger itself capable of operating on multi-voltages (e.g., 110-240V)?
A:This charger accepts all M18 and M12 Battery Packs. The charger is to be used with 120V only/
Q:Can i use 220-240 volt?
A:Yes, you can use 220-240 volt.
A:The charger is rated for 120 VOLT AC ONLY.
Q:Does it have slots on the bottom to use as a wall mount?
A:No, this charger cannot be wall mounted. Rubberized feet keep charger in place on slick surfaces
A:It has the same slots to wall mount as per the old style m18 charger. So yes, it can be mounted