|Air Consumption at 40 PSI - SCFM:||3.8|
|Air Consumption at 90 PSI - SCFM:||3.3|
|Air Inlet Size:||1/4 in.|
|Drive System:||Direct Drive|
|Noise Rating - dBA:||80|
|Operating Pressure - PSI:||130|
|Pump Speed - RPM:||1,730|
|Pump Type:||Cast Iron|
|Tank Capacity:||2.6 gal.|
|Tank Style:||Hot Dog|
Do you have questions about this product?
Get answers from real customers and in-house experts with AnswerBox.
Q:will this work with a framing nailer
A:It is suggested to use at least a 6 gallon compressor to operate an nailer.
A:I have fired cases of framing nails with this compressor. The only time it might lag is nailing a bunch of subfloor fast and that is no big deal, just wait 10 seconds and go back to it. This is an awesome compressor.
Q:will it run an impact gun requiring a 80 gallon compessor?
A:NO. it does not have enough CFM or capacity to adequately run an impact gun.
A:Hi, yes, as long as the CFM specifications match up, it will run an impact gun requiring an 80 gallon compressor storage tank, but it will need to run the compressor after only a moment or two of using the impact gun in order to provide it with the amount of air it needs.