Comments about 10-in Dual Slide Compound Miter Saw with Laser:

I got a reconditioned one. When it arrived, the box was banged up, but it seemed like everything was ok. The saw is a big improvement over my cheap little CMS. I haven't gotten to use it a lot yet, but I like the way it cuts. The miter lock/adjustment takes some getting used to since I've been accustomed to the lever style of Dewalt and others, but with time it will probably be second nature. The fence seems odd to have two places to slide in and out, but is nice and high. I bought it as an upgrade from dewalt and based on some good reviews from others in the field.

Comments about 10-in Dual Slide Compound Miter Saw with Laser:

This saw had great reviews from trade magazines and purchasers with good reason. Nice unit, ready to go right out of the box.

Comments about 10-in Dual Slide Compound Miter Saw with Laser:

I've been a professional remodeler for about 28 years, bought the Hitachi 8.5" slider about 19 years ago. It's paid for itself a few times over, replaced bearings etc.. It's been a good saw but time for a new one. Not too keen on the alian look of the new Hitachi and don't care to carry around a bulky 12" saw. After shopping around in big box stores and on line, it seemed that the Makita LS1016L was the right choice for me. I ordered a factory reco to save a hundred bucks and in my mind, I'm thinking the factory would take care of all the boo boos, but it turned out to be not the case. After reading reviews I new that I might have an issue or two such as the upper rails being too rough and stiff which was the case in my saw as well but was a quick fix by loosening the allen set screws sliding it back and forth a couple of times and tightening them back down while in the foward position. But there was a couple of issues that others did not list that I had with mine. One thing was the sliding lever on the right of the handle that supposed to lock the lower rails, didn't hold as tight as they should and I didn't see an adjustment. The other issue was when sliding from miter to miter, the miter lock plate would scrape on the miter scale plate in a couple spots, very annoying. I checked out the ones in three different Home Desperate stores([@]), none had these issues. I called Makita, they sent me a new lock plate and miter scale plate (free of charge). I swapped the parts out and unfotunatly the problem was not resolved. I contacted Tyler Tools, they e-mailed me a free return slip (outstanding behavior). For me it was't worth the hundred bucks I saved for the amount of time I had to F with it, but with that being said, otherwise the saw was everyhing I could hope for. I only had to tweek the fence ever so slightly. I would expect that with any saw and there were no issues on getting it where it needed to be. The upper rails I leave locked unless I'm cutting something over 10" wide (nice). It has a slower RPM than other saws in it's class but that doesn't seem to effect the quality of cuts and might even assist in it's super smooth starts and stops. The laser was spot on. Even though it is adjustable I didn't have to mess with it. It did come with a real nice 60 tooth blade. Over all, issues aside I'm very pleased with dealing with Makita and Tyler Tools (all pro and on the case) and guess what, I'm going to order a new version of the same saw with a stand. Seems like a good deal. If it comes without issues, I'll give it 5 stars. Crossing my fingers.

Comments about Makita 10-in Dual Slide Compound Miter Saw with Laser:

I bought this saw for work around the house. It is definately a quality saw. The blade makes precise and clean cuts. The laser eliminates having to mark the wood. Just throw your tape over the piece and line up the laser with where you want to cut. The arm that locks in the piece you are cutting is a big bonus that I wasn't counting on.

Comments about 10-in Dual Slide Compound Miter Saw with Laser:

I like the acurate laser,the 4 post slide really gives this saw a heavy duty feel,the motor runs so smooth and quite,i relly like this saw so far.The one thing i found out right away was the table angle locking notch at 0 is off by 1 degree,the fence does not look straight, if you hold a straight piece against the fence there is a very small gap on the right side.

Comments about 10-in Dual Slide Compound Miter Saw with Laser:

Can't say enough about this saw. It really delivers in quality. The recon price was fantastic and anyone who is a do-it-youreslfer or a pro would find this saw a wonderful addition to their tool collection. You'll start to wonder after a little while how you ever got by without it! Price and speed of deliery were unrivaled as usual from CPO as usual.

Comments about 10-in Dual Slide Compound Miter Saw with Laser:

I had a regular miter saw and have outgrown it. I spent many months looking and reading about miter saws. I have read only good things about this saw.
I read that the many people said the laser line is precise. Beleive it or not, it really is. It is quiet, smooth, I could go on, but I love it, just feels good. I should never have to buy another miter saw again.
Also, the makita workplace stand is incredible.

Comments about 10-in Dual Slide Compound Miter Saw with Laser:

I am a hobbyist, not a pro, so it was not easy for me to justify spending this much on a sliding miter saw but now that I've used it I'm glad I spent the money. I have owned one miter saw previously, a $200 bargain saw that left a lot to be desired. The LS1016 is a pleasure to use, accurate right out of the box, smooth and powerful, yet quiet. If I really had to find a fault I would say the upper sliders are less smooth than the lowers, a bit of a "ratchety" feel, but nothing to quibble about. I would have no reservations about doing business with Makita CPO again, overall one of my best tool buys yet.

Comments about Makita 10-in Dual Slide Compound Miter Saw with Laser:

Was looking at the factory refurbished version of this saw, but the extra 10% off plus free shipping made the new saw too good to pass up. This is a great saw, always came out on top when tested against the competition and after using it I see why. Have bought other refurbished tools from CPO and never been diappointed so if new is not in your budget then buy the refurbished model. Either way you will be happy with this saw.

Comments about 10-in Dual Slide Compound Miter Saw with Laser:

This was a refurbished model, and if I look closely, I can tell that it was used slightly. Everything works fine though. The only thing was the web site indicated that it did not come with a blade, so I bought one separately, but it DID come with one, so now I have two!