Products
- Featured Items
- Top Sellers
- Price (Low to High)
- Price (High to Low)
- Featured Items
- Top Sellers
- Price (Low to High)
- Price (High to Low)
Mothers Day Sale! Save an Extra 10% off your order! Coupon code: CPOMOM
- Max. Water Flow Rate (GPM): 2.5
- Injection Method: Chemical/Detergent Injection
- Hose Length: 25 ft
- Engine Make: Kohler
- Max. Water Pressure (PSI): 3400
Mothers Day Sale! Save an Extra 10% off your order! Coupon code: CPOMOM
- Impact Energy: 4.3 ft-lbs
- Blows Per Minute(BPM): 2900
- No-Load Speed (RPM): 0 - 500
- Batteries Included: 2
- Motor Type: Brushless
- Chuck Type: Keyless
- Chain Gauge: 0.05 in
- Bar Length: 20 in
- No-Load Speed (RPM): 9000
- Batteries Included: 2
- Battery 2 Amp Hour: 5 Ah
- Battery Amp Hour: 5 Ah
- Voltage: 18V
- Batteries Included: 2
- Battery 2 Amp Hour: 1.3 Ah
- Battery Amp Hour: 3 Ah
- Voltage: 20V
Mothers Day Sale! Save an Extra 10% off your order! Coupon code: CPOMOM
- Depth Adjustment: Yes
- Blade Position: Right
- Depth of Cut (45 Degrees): 2 in
- Depth of Cut (90 Degrees): 2-9/16 in
- Bevel Capacity: 57 Degrees
Deals Available
- Max. Water Flow Rate (GPM): 1.1
- Max. Water Pressure (PSI): 3000
- Hose Length: 25 ft
Incredible Savings Every Week with Our Weekly Markdowns!
- Bevel Angle (Right): 45 Degrees
- Bevel Direction: Dual
- Cut Guidance System: No
- Miter Angle (Right): 57 Degrees
- Miter Type: Compound
- Weight: 78.5 lbs.
Mothers Day Sale! Save an Extra 10% off your order! Coupon code: CPOMOM
- Pump Speed (RPM): 1680
- Tank Construction: Aluminum
- Tank Capacity: 4 gal
- Air Consumption at 90 PSI (SCFM): 5.3
- Noise Rating (dBA): 70
- Batteries Included: 2
- Battery Amp Hour: 5 Ah
- Line Feed System: Bump Feed
- Cutting Width: 15 in
Mothers Day Sale! Save an Extra 10% off your order! Coupon code: CPOMOM
- Blows Per Minute(BPM): 3150
- Batteries Included: 0
- Motor Type: Brushless
- Impact Energy: 6.1 ft-lbs
- No-Load Speed (RPM): 0 - 1500
- Chuck Type: SDS-Max
- Amperage: 13
- Switch Type: Trigger
- No-Load Speed (RPM): 9000
- Depth Adjustment: Yes
- Depth of Cut (45 Degrees): 2-3/8 in
- Depth of Cut (90 Degrees): 3-3/8 in
- Bevel Capacity: 60 Degrees
- Rip Capacity (Right): 24 in
- Depth of Cut (90 Degrees): 2-1/2 in
- Table Depth: 19-1/10 in
- Weight: 45 lbs.
- Chain Gauge: 0.05 in
- Bar Length: 20
- Handle Type: Rear Handle
Incredible Savings Every Week with Our Weekly Markdowns!
- Blows Per Minute(BPM): 5000
- Motor Type: Brushless
- Impact Energy: 2.8 ft-lbs
- No-Load Speed (RPM): 0 - 980
- Chuck Type: SDS-Plus