Easy to install and use!

1. Mount saw blade on the miter saw.
2. Use the laser guide as the outside washer - postion warning side out.
3. Attach using existing bolt - if no bolt is too short, use the appropriate extra long bolt that is included.

Laser activates On/Off with the rotation of blade!

Note: Does NOT fit Bosch, Ridgid or Protech Saws!

Irwin 3061001 Miter Saw Laser Guide Features:
• Battery Life -- 1.5 hours or 5,000 cuts
• Diode Life -- 3,000 hours or 2 million cuts

The Irwin 3061001 Miter Saw Laser Guide Includes:
• Batteries
• Extra long bolts
• Case

Works on DeWALT, Makita, Milwaukee, Porter-Cable, Hitachi, Wilton and many other 8-1/4", 8-1/2", 10" and 12" miter saws except Bosch, Ridgid or Protech. A small number of 12" miter saws will not allow the laser guide to mount flush when using a thin kerf sawblade because the bushing on the arbor of the miter saw is too thick. Using a standard 12" sawblade with an approximately 1/8" thick body should prevent this problem. Not interchangeable with abrasive chop saws. Click Here to go to the Irwin Abrasive Chop Saw Laser Guide.