|Arbor Size:||1 in.|
|Blade Diameter:||12 in.|
|Blade Speed (RPM):||3800|
|Cutting Capacity (0 Miter/0 Bevel):||4-3/16 in. x 12-1/4 in.|
|Cutting Capacity (0 Miter/45 Bevel Left):||2-3/4 in. x 12-1/4 in.|
|Cutting Capacity (0 Miter/45 Bevel Right):||1-3/4 in. x 12-1/4 in.|
|Cutting Capacity (45 Miter Left/0 Bevel):||4-3/16 in. x 8-5/8 in.|
|Cutting Capacity (45 Miter Left/45 Bevel Left):||2-3/4 in. x 8-5/8 in.|
|Cutting Capacity (45 Miter Right/0 Bevel):||4-3/16 in. x 8-5/8 in.|
|Cutting Capacity (45 Miter Right/45 Bevel Right):||1-3/4 in. x 8-5/8 in.|
|Laser Guide System:||Yes|
|Max. Bevel Angle (Left):||45 Degrees|
|Max. Bevel Angle (Right):||45 Degrees|
|Max. Miter Angle (Left):||46 Degrees|
|Max. Miter Angle (Right):||57 Degrees|
|Slide System:||Dual Rail|
Reviewed by 4 customers
Displaying reviews 1-4
I have had this saw 6 years now it is very good.
If you are a finish carpenter or builder this miter saw gives you perfect cuts and is very powerful. I make rustic style furniture and also do carpentry work. I purchased this saw over two months ago and all cuts are still on the money.
I use this saw mostly on 5/4 oak and ash and hickory log saplings and it cuts right through without problems.
Do you have questions about this product?
get answers from real customers and in-house experts with AnswerBox.
Q:What's the depth of the total saw in a full forward position from rear to front of handle. Looking to have this in a shop and want to know how much room it takes to operate.
Q:Ok so lets be clear , there are no positive detents when compounding the saw?? No 15,21.5,33.9,45right? Its just like my older dewalt with no positive detents while compound cutting? ?
Q:are there any stands for this saw? also any type of extensions available for this saw?
Q:ARE THERE ANY STANDS AND FENCE EXTENDERS FOR THE 12" SLIDING MITRE SAW
Q:Were exactly are the carbon brushes? How many of them? What do I look for as far as wear? Is there a location on the saw for storage of blade wrench?
A:The brushes transfer the electricity from outside the motor to the spinning winding in the center of the motor. They undergo quite a lot of friction, and after a while wear out. Carbon is used as it is a reasonable conductor, and is soft enough to wear down instead of wearing down the "comutator" - the ring the brushes press against. Brushes are designed to be replaceable in large motors because of this.
Q:what is crosscut capacity at 57 degrees
A:The information you are looking for can be found in the manual on page 12. Here is a link to the manual:
Q:what are the cut dimensions (front to back) for 90 degree and 45 degree
A:This saw will crosscut 12 1/4" at 90 and miter 8 5/8" at 45.
All Hitachi tools are inspected before they leave the factories to ensure the highest quality for customers. If you are not satisfied with any Hitachi tool within 30 days of purchase, please return the product with receipt to the original place of purchase for a refund or replacement. This guarantee covers power tools only. See the Hitachi "Limited Warranty" below for accessories & parts and further warranty information.
This warranty of Hitachi Power Tools (hereinafter the "Hitachi Product") extends to the original purchaser of the Hitachi Product.
Hitachi products are warranted to the original purchaser to be free from defect in materials and workmanship for a period of five (5) years from the original purchase date. (See exceptions below.)
The product categories listed below are warranted to the original purchaser to be free from defect in materials and workmanship for a Lifetime from the original purchase date. Lifetime is defined as the serviceable life of the product. This is defined as the period during which all components are available.
The product categories listed below are warranted to the original purchaser to be free from defect in materials and workmanship for a period of two (2) years from the original purchase date.
The product categories listed below are warranted to the original purchaser to be free from defect in materials and workmanship for a period of one (1) year from the original purchase date.
The product categories listed below are warranted to the original purchaser to be free from defect in materials and workmanship for a period of ninety (90) days from the original purchase date.
The product category listed below is warranted to the original purchaser to be free from defect in materials and workmanship for a period of thirty (30) days from the original purchase date.
Warranty coverage is conditioned upon the purchaser furnishing Hitachi or its Authorized Service Center with adequate written proof of the original purchase date.
The return of the Owner's Registration Card by the original purchaser within ten (10) days after the original purchase date is not a condition precedent to coverage under this warranty.
This Hitachi Product is warranted by Hitachi Koki U.S.A., Ltd. (referred to hereinafter as Hitachi), 3950 Steve Reynolds Blvd. Norcross, GA 30093, against defective materials or workmanship.
This warranty is void if: defects in materials or workmanship or damages result from repairs or alterations which have been made or attempted by others or the unauthorized use of nonconforming parts; the damage is due to normal wear and tear, the damage is due to abuse (including overloading of the Hitachi Product beyond capacity), improper maintenance, neglect or accident: or the damage is due to use of the Hitachi Product after partial failure or use with improper accessories.
DURING THE ABOVE WARRANTY PERIOD, SHOULD YOUR HITACHI PRODUCT EXHIBIT A DEFECT IN MATERIALS OR WORKMANSHIP, SUCH DEFECT WILL BE REPAIRED WHEN THE COMPLETE HITACHI PRODUCT IS RETURNED, POSTAGE PREPAID AND INSURED, TO A HITACHI AUTHORIZED SERVICE CENTER. OTHER THAN THE POSTAGE AND INSURANCE REQUIREMENT, NO CHARGE WILL BE MADE FOR REPAIRS COVERED BY THIS WARRANTY.
NO WARRANTY, ORAL OR WRITTEN, EXPRESSED OR IMPLIED, OTHER THAN THE ABOVE WARRANTY IS MADE WITH REGARD TO THIS HITACHI PRODUCT. HITACHI DISCLAIMS ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR USE OR PURPOSE, AND ALL OTHER WARRANTIES. IN NO EVENT SHALL HITACHI BE LIABLE FOR ANY INCIDENTAL, SPECIAL, CONSEQUENTIAL OR PUNITIVE DAMAGES, OR FOR ANY COSTS, ATTORNEY FEES, EXPENSES, LOSSES OR DELAYS ALLEGED TO BE AS A CONSEQUENCE OF ANY DAMAGE TO, FAILURE OF, OR DEFECT IN ANY PRUDUCT INCLUDING, BUT NOT LIMITED TO, ANY CLAIMS FOR LOSS OF PROFITS.
Some states do not allow limitations on how long an implied warranty lasts, so the above limitations may not apply to you. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you.
Please consult Hitachi's website www.hitachipowertools.com or call 1-800-829-4752 to locate your nearest service facility for warranty and non-warranty service on a Hitachi product.