|Depth Capacity:||4 in.|
|Tine Diameter:||8 in.|
|Width Capacity:||8.25 in. - 10 in.|
Reviewed by 2 customers
Displaying reviews 1-2
Product works pretty well, better than expected. Had to till the front yard containing rocks. Tines could have been stronger as several bent (reason for the 4 star rating). I would have preferred the 40 amp machine, but was in a time frame where I needed it immediately, and this was the only style available. Overall, a good product for the money. I would recommend it for lighter uses.
Worked great on my existing garden , not as well on on touched ground. But I still doubled the size of my garden it was a little harder tilling the grassy ground but this little guy worked hard and did the job.I could not be happier with my GREENWORKS tiller should have done this years ago. I would recommend this to anybody that is tired of useing a shovel , NEVER AGAIN will I garden by hand I have retired my shovel for good BUY ONE you won't be sorry AAAAAAAAAAAA++++++++++++
Do you have questions about this product?
Get answers from real customers and in-house experts with AnswerBox.
Q:I lost the bolt and pin to hold wheels on. I think the part numbers are 6620643 Bolt and 33207289 Pin. How much are these parts?
A:Please call the manufacturer direct at 1-888-909-6757 for assistance with parts.
Q:are there replacement parts available, especially the blades? Are there straight blades available so that it could be used to aerate or dethatch a lawn?
A:For replacement parts, please contact Greenworks directly at 1-888-909-6757
Q:I have 2 pins #45 left over after install, what are they for I can't tell in the instructions
A:2 types of pins are supplied. A "Ring Pin" (part #17) which has a round ring on it and a "Hitch Pin" which is the larger straight type pin with no ring (part #45). The "Ring Pin" is used when you use all four (4) tines on the shaft, two (2) on each side. The "Hitch Pin" is used when you only use two (2) tines on the shaft, one (1) on each side for tilling a narrow area. This is described on page 16 of the manual and referenced in Fig.8 unfortunately they don't show the assembly correctly. Each tine, one on each side, should be pushed to the gear box base and the "Hitch Pin" inserted into the second hole on the shaft (each side). Make sure what they call the "Flute" is towards the gear box and the tines point the correct direction. Hope this helps.
A:For assistance with this question, please contact Greenworks directly at 1-888-909-6757.
Q:Do you have a manual that I can print out! I have never ran A tiller and would like to have one!
A:Here is a link to the manual for this cultivator:
Double The Industry Standard
NEW GreenWorks products are protected against all defects under normal use for a period of (4) four years (90 days for commercial use) from the shipping date.
Reconditioned GreenWorks products are protected against all defects under normal use for a period of 30 Days from the shipping date.
GreenWorks can opt to repair, replace or issue a refund for products that are determined to be defective, or that have been damaged during shipping. Replacement of products or parts subject to normal wear and tear is the responsibility of the customer. If GreenWorks accepts a return under Warranty, you can return the defective or damaged product only after you call and receive a Return Authorization from GreenWorks. You also will receive a refund for your original shipping charges, and GreenWorks will arrange and pay for your return shipping charges. Batteries carry a one-year warranty against defects in workmanship and materials. Batteries must be charged in accordance with the operator's manuals directions and regulations in order to be valid.