My Cart: 0 Items
Shop By Brand
-
Black and Decker Tools
Shop By Category
Reconditioned
-
Reconditioned Drills
Accessories
-
Air Tool Accessories
Factory Reconditioned Milwaukee 2470-80 12V Cordless M12 PVC Shear (Tool Only)
Model#: MILR2470-80
-
Factory Reconditioned
Retail:
$159.99
Our Price:
$134.99
Sale Price:
$114.99
You Save:
$45.00 (28%)
Availability:
Out of Stock
This model is also available New
People who purchased this item also viewed...
-
milr6852-80
-
dewrdw890r
-
milr2471-81
-
milr2432-80
-
milr2401-80
-
rtzrrfs1000-20-rt
Print Page
Cutting faster, cleaner and closer than traditional methods, the new M12 Cordless PVC Shear utilizes a super sharp stainless steel blade for burr-free cuts, slices through 2" PVC in as fast as 3 seconds, and offers an offset blade to cut PVC mounted to a stud or close to a wall. Powered by the MILWAUKEE M12 LITHIUM-ION battery, the new PVC Shear is able to cut over 200 times on a single charge.
Features:
- Powerful Mechanism - Cuts up to 2-in schedule 40 PVC in 3 seconds
- Ultra Sharp Blade with Pierce Point - No burrs or shavings to remove
- Offset Blade - Cuts PVC / PEX in-wall, in-ground, or close to wall
- Quick Return Blade - Increased productivity during repetitive cuts
- All Metal Planetary Drive - Delivers over 200 cuts per charge
- Stainless Steel Blade and Aluminum Jaw - Impact, water and rust resistant
- Variable Speed Trigger - Controlled cut in warm or cold weather
- On Board Fuel Gauge - Displays remaining run-time
Includes:
- M12 Cordless PVC Shear (Tool Only) - 2470-80
- Tool Only - Battery and Charger Sold Separately
Resources:
Print Page
| Series: | M12 |
| Voltage: | 12V |
| Torque: | 1,900 in-lbs. |
| Capacity: | 2-in PVC, 2-3/8-in Outside Diameter |
| Blade: | 3mm Reinforced Stainless Steel |
| Shear Head: | Water / Rust Resistant Aluminum Jaw |
| Switch Type: | Two-Action, Variable Speed with Reverse |
| Gear Drive: | All-Metal Planetary Drive with Protecting Clutch |
| Fuel Gauge: | Yes |
| Battery Type: | M12 Li-Ion |
| Shipping Weight: | 4.8 lbs. |
Print Page
The Milwaukee Reconditioned Product Limited Warranty Every MILWAUKEE RECONDITIONED product is warranted to be free from defects in material and workmanship.
Subject to certain exceptions, MILWAUKEE will repair or replace any part on a reconditioned product which, after
examination, is determined by MILWAUKEE to be defective in material or workmanship for a period of one (1) year after
the date of purchase. Return the reconditioned product and a copy of proof of purchase to a MILWAUKEE factory Service
/Sales Support Branch location or MILWAUKEE Authorized Service Station, freight prepaid and insured. This warranty
does not apply to damage that MILWAUKEE determines to be from repairs made or attempted by anyone other than
MILWAUKEE authorized personnel, misuse, alterations, abuse, normal wear and tear, lack of maintenance, or accidents.
THIS WARRANTY SUPERSEDES ANY PRIOR OR OTHER WARRANTIES CONTAINED IN ANY OPERATOR'S
MANUAL OR OTHER DOCUMENTS RELATING TO THIS PRODUCT. THIS IS THE ONLY WARRANTY APPLICABLE
TO THIS RECONDITIONED PRODUCT.
All reconditioned product is etched or stamped with the MONTH & YEAR in which it was reconditioned, along with an “R” - Recondition Designation and the reconditioning plant location designation.
Product etched or stamped with an RG09-08 or later date code will be covered by the above one (1) year limited warranty – if the date code reads RK08-08 or before it is covered by the Milwaukee five (5) year new tool limited warranty.
Warranty Registration is not necessary to obtain the applicable warranty on a MILWAUKEE product. The reconditioning date of the product will be used to determine the warranty period if no proof of purchase is provided at the time warranty service is requested.
MILWAUKEE does not cover return freight or labor charges associated with the inspection and testing of reconditioned product that is found by MILWAUKEE not to be a valid warranty claim. A valid warranty claim must be substantiated by the discovery of defective material or workmanship by MILWAUKEE.
ACCEPTANCE OF THE EXCLUSIVE REPAIR AND REPLACEMENT REMEDIES DESCRIBED HEREIN IS A CONDITION OF THE CONTRACT FOR THE PURCHASE OF EVERY MILWAUKEE RECONDITIONED PRODUCT. IF YOU DO NOT AGREE TO THIS CONDITION, YOU SHOULD NOT PURCHASE THE PRODUCT. IN NO EVENT SHALL MILWAUKEE BE LIABLE FOR ANY INCIDENTAL, SPECIAL, CONSEQUENTIAL OR PUNITIVE DAMAGES, OR FOR ANY COSTS, ATTORNEY FEES, EXPENSES, LOSSES OR DELAYS ALLEGED TO BE AS A CONSEQUENCE OF ANY DAMAGE TO, FAILURE OF, OR DEFECT IN ANY PRODUCT INCLUDING, BUT NOT LIMITED TO, ANY CLAIMS FOR LOSS OF PROFITS. THIS WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES OR CONDITIONS, WRITTEN OR ORAL, EXPRESSED OR IMPLIED. WITHOUT LIMITING THE GENERALITY OF THE FOREGOING, MILWAUKEE DISCLAIMS ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR USE OR PURPOSE, AND ALL OTHER WARRANTIES.
This warranty applies to RECONDITIONED product sold in the U.S.A., Canada and Mexico only.
Please call Milwaukee Electric Tool Corporation for warranty questions at 800-729-3878
All reconditioned product is etched or stamped with the MONTH & YEAR in which it was reconditioned, along with an “R” - Recondition Designation and the reconditioning plant location designation.
Product etched or stamped with an RG09-08 or later date code will be covered by the above one (1) year limited warranty – if the date code reads RK08-08 or before it is covered by the Milwaukee five (5) year new tool limited warranty.
Warranty Registration is not necessary to obtain the applicable warranty on a MILWAUKEE product. The reconditioning date of the product will be used to determine the warranty period if no proof of purchase is provided at the time warranty service is requested.
MILWAUKEE does not cover return freight or labor charges associated with the inspection and testing of reconditioned product that is found by MILWAUKEE not to be a valid warranty claim. A valid warranty claim must be substantiated by the discovery of defective material or workmanship by MILWAUKEE.
ACCEPTANCE OF THE EXCLUSIVE REPAIR AND REPLACEMENT REMEDIES DESCRIBED HEREIN IS A CONDITION OF THE CONTRACT FOR THE PURCHASE OF EVERY MILWAUKEE RECONDITIONED PRODUCT. IF YOU DO NOT AGREE TO THIS CONDITION, YOU SHOULD NOT PURCHASE THE PRODUCT. IN NO EVENT SHALL MILWAUKEE BE LIABLE FOR ANY INCIDENTAL, SPECIAL, CONSEQUENTIAL OR PUNITIVE DAMAGES, OR FOR ANY COSTS, ATTORNEY FEES, EXPENSES, LOSSES OR DELAYS ALLEGED TO BE AS A CONSEQUENCE OF ANY DAMAGE TO, FAILURE OF, OR DEFECT IN ANY PRODUCT INCLUDING, BUT NOT LIMITED TO, ANY CLAIMS FOR LOSS OF PROFITS. THIS WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES OR CONDITIONS, WRITTEN OR ORAL, EXPRESSED OR IMPLIED. WITHOUT LIMITING THE GENERALITY OF THE FOREGOING, MILWAUKEE DISCLAIMS ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR USE OR PURPOSE, AND ALL OTHER WARRANTIES.
This warranty applies to RECONDITIONED product sold in the U.S.A., Canada and Mexico only.
Please call Milwaukee Electric Tool Corporation for warranty questions at 800-729-3878
Print Page
Product Reviews
REVIEW SNAPSHOT®
by PowerReviewsPros
- Easy to use (7)
- Good grip (5)
- Good power output (5)
- Good safety features (5)
- Easy to store (4)
Cons
- Heavy (3)
Best Uses
- In the field (5)
- In the workshop (3)
- Reviewer Profile:
- Professional (7)
Reviewed by 8 customers
Sort by
Displaying reviews 1-5
Previous | Next »
Pros
- Easy To Store
- Easy To Use
- Good Grip
- Good Safety Features
- Powerful
Cons
- Heavy
Best Uses
- In The Field
Comments about 12V Cordless M12 PVC Shear (Tool Only):
Electrician, use on the job
Pros
- Easy To Store
- Easy To Use
- Good Safety Features
Cons
- Heavy
Best Uses
- In The Field
- In The Workshop
Comments about 12V Cordless M12 PVC Shear (Tool Only):
I bought this because I had wrist problems and couldn't use manual shears. It works well. Its only flaw is its bulky/heavy for a 12 volt tool.
Pros
- Easy To Store
- Easy To Use
- Good Grip
- Good Safety Features
- Powerful
Cons
Best Uses
- In The Field
- In The Workshop
- In The Yard
Comments about 12V Cordless M12 PVC Shear (Tool Only):
In the marine canvas industry we use a fare amount of PVC track in the fabrication of inclosures. This tool makes the job a lot easier and much quicker than the use of hand tools. I have replaced three hand tools this year as they are built poorly. This tool is built to last. Thank you !
Pros
- Easy To Use
Cons
- Heavy
Best Uses
- In The Workshop
Comments about 12V Cordless M12 PVC Shear (Tool Only):
fast and easy to use
Pros
- Easy To Store
- Easy To Use
- Good Grip
- Good Safety Features
- Powerful
Cons
Best Uses
- In The Field
Comments about 12V Cordless M12 PVC Shear (Tool Only):
Great product! Saftey glasses should be a must! if you cut a pipe in very cold weather or try to trim a piece to short it will break/shatter. Great tool and saves time,clean up, and on large jobs or small worth every penny!
Displaying reviews 1-5
Previous | Next »
Print Page
Factory-Reconditioned products have been returned to the manufacturer and are restored to like-new operating condition; they go through a rigorous testing and inspection process. Plus, they offer a significant savings vs. new.
- Reconditioned products may have minor cosmetic blemishes or scratches that do not affect item performance may be present.
- Reconditioned products may not come with all of the consumables the new version comes with (bits, sanding pads/papers, cases, etc.).
- Both come with a manufacturer warranty and are covered by our Money Back Guarantee;
New is 30 days, Reconditioned is 60 days.
 |
 |
|
| Condition: | New | Factory Reconditioned |
| Features: | Same | Same |
| Specs: | Same | Same |
| Includes: | M12 Cordless PVC Shear (Tool Only) - 2470-20, Tool Only - Battery and Charger Sold Separately |
M12 Cordless PVC Shear (Tool Only) - 2470-80, Tool Only - Battery and Charger Sold Separately |
| Availability: | In Stock | Out of Stock |
| Warranty: | 5 year Milwaukee | null |
Customers Who Bought This Item Also Purchased...
-
milr2411-82
-
miln2510-20
-
miln48-44-0400
-
miln48-59-2401
-
miln48-11-2402
-
milr2401-82
