|Air Inlet Size:||1/4 in.|
|Depth of Drive:||Adjustable|
|Dry Fire Lockout:||No|
|Fastener Collation:||Wire Weld|
|Fastener Type:||Framing and Metal Connector Nails|
|Firing Modes:||Contact / Sequential Actuation|
|Magazine Angle:||28 Degrees|
|Magazine Type:||Bottom Loading|
|Max. Fastener Length:||3-1/2 in.|
|Min. Fastener Length:||2 in.|
|Operating Pressure - PSI:||80 - 120|
|Tip Style:||Nose Adaptor|
REVIEW SNAPSHOT®by PowerReviews
Reviewed by 59 customers
Arrived on time, looked new and worked great. Would feel very comfortable ordering more refurbished tools from CPO!
Bought this nailer to use finish the second half of my basement (the first half was done with a hammer). I wish I had bought this nailer before I did the first half, it would have made it so much easier and faster. Some other reviewers have mentioned a hard kickback, but I would have to disagree, and add that there is far less stress to your arm/wrist/hand than using a hammer. I went with a reconditioned one and saved a good bit of money, and the nailer looked like it had never been used. Overall this has been a great purchase that I wish I had made sooner.
Framing basement walls... More than enough power.
Although I am serious DIY'er, I was reluctant to buy a frame nailer on the grounds that only a professional really needs one. However, I just finished using this nailer on some overhead boards, and the task would have been impossible without it. This nailer drives 3" glue-coated nails like they were finish nails. I even fired off a clip of 30 degree, 2" nails without a jam or misfire. Should have bought sooner.
Drives larger nails than my older bostich framer. Love the hook absolutely needed. Nicer loading nails. Better balance.
Do you have questions about this product?
get answers from real customers and in-house experts with AnswerBox.
Q:What type of nails does it use? Clipped heads or round heads? My existing gun uses 28degree clipped heads. Will these nails work on this gun?
A:This nailer uses a 28° wire collated stick nail in lengths of 2” to 3-1/2” (50 - 90mm) and shank diameters of .113” to .131” (2.8 - 3.3mm).
Q:I don't understand the degree category. My former nailer is a 30 degree gun. Will my supply of 30 degree nails work in a 28 degree gun?
A:No, if you are using a 28 degree gun, you will need to use 28 degree nails.
Q:What's difference b/w continuous and sequential fire capability? Which does this unit have?
A:What is a contact trigger? What is a sequential trigger?
Q:Is there a recommended capacity of compressor for this item?
A:You will need a minimum of 6 gallons, but if you are nailing a lot of product quickly, you should consider something larger.
|Includes:||Wire Weld Framing Nailer - F28WW||Wire Weld Framing Nailer - U/F28WW|
|Availability:||In Stock||In Stock|
|Warranty:||7 Year Limited||1 Year Limited|
|You Save:||N/A||$90.00 (41%)|
Stanley Fastening Systems, L.P. 7 Year Limited Warranty (1 Year for Reconditioned Products) - U.S. and Canada Only
Effective December 1, 2005 Bostitch, L.P. warrants to the original retail purchaser that the product purchased is free from defects in material and workmanship, and agrees to repair or replace, at Bostitch's option, any defective Bostitch branded pneumatic stapler or nailer for a period of seven (7) years from date of purchase (one (1) year from the date of purchase for reconditioned pneumatic staplers or nailers and for new and reconditioned compressors and tools used in production applications). Warranty is not transferable. Proof of purchase date required. This warranty covers only damage resulting from defects in material or workmanship; it does not cover conditions or malfunctions resulting from normal wear, neglect, abuse, accident or repairs attempted or made by other than our national repair center or authorized warranty service centers. Driver blades, bumpers, o-rings, pistons and piston rings are considered normally wearing parts. For optimal performance of your Bostitch tool always use genuine Bostitch fasteners and replacement parts.
This warranty IS IN LIEU OF ALL OTHER EXPRESS WARRANTIES AND with respect to compressors and tools used in production applications, limits to a period of one (1) year from the date of purchase all implied warranties INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. BOSTITCH SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES.
Some states and countries do not allow the exclusion or limitation of incidental or consequential damages, so the above limitations or exclusions may not apply to you. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state and country to country.