|Air Inlet Size:||1/4 in.|
|Depth of Drive:||Adjustable|
|Dry Fire Lockout:||No|
|Fastener Collation:||Wire Weld|
|Fastener Type:||Framing and Metal Connector Nails|
|Firing Modes:||Contact / Sequential Actuation|
|Magazine Angle:||28 Degrees|
|Magazine Type:||Bottom Loading|
|Max. Fastener Length:||3-1/2 in.|
|Min. Fastener Length:||2 in.|
|Operating Pressure - PSI:||80 - 120|
|Tip Style:||Nose Adaptor|
Do you have questions about this product?
Get answers from real customers and in-house experts with AnswerBox.
Q:Can you use nails of other manufacturers, generic, or do you have to use Bostich only? Are nails available in Stainless or galvanized?
A:Any manufacturers nails can be used
Q:Which type of nails will work with this uf28ww Bostich nailer, clipped head or full round head?
A:The recommended type of nails for this nailer are full round head framing nails.
Q:What type of nails does it use? Clipped heads or round heads? My existing gun uses 28degree clipped heads. Will these nails work on this gun?
A:This nailer uses a 28° wire collated stick nail in lengths of 2” to 3-1/2” (50 - 90mm) and shank diameters of .113” to .131” (2.8 - 3.3mm).
Q:I don't understand the degree category. My former nailer is a 30 degree gun. Will my supply of 30 degree nails work in a 28 degree gun?
A:No, if you are using a 28 degree gun, you will need to use 28 degree nails.
A:no, it will jam.
Q:What's difference b/w continuous and sequential fire capability? Which does this unit have?
A:What is a contact trigger? What is a sequential trigger?
Q:Is there a recommended capacity of compressor for this item?
A:You will need a minimum of 6 gallons, but if you are nailing a lot of product quickly, you should consider something larger.
|Includes:||Wire Weld Framing Nailer - F28WW||Wire Weld Framing Nailer - U/F28WW|
|Availability:||In Stock||In Stock|
|Warranty:||7 Year Limited||1 Year Limited|
|You Save:||N/A||$65.00 (26%)|
Stanley Fastening Systems, L.P. 7 Year Limited Warranty (1 Year for Reconditioned Products) - U.S. and Canada Only
Effective December 1, 2005 Bostitch, L.P. warrants to the original retail purchaser that the product purchased is free from defects in material and workmanship, and agrees to repair or replace, at Bostitch's option, any defective Bostitch branded pneumatic stapler or nailer for a period of seven (7) years from date of purchase (one (1) year from the date of purchase for reconditioned pneumatic staplers or nailers and for new and reconditioned compressors and tools used in production applications). Warranty is not transferable. Proof of purchase date required. This warranty covers only damage resulting from defects in material or workmanship; it does not cover conditions or malfunctions resulting from normal wear, neglect, abuse, accident or repairs attempted or made by other than our national repair center or authorized warranty service centers. Driver blades, bumpers, o-rings, pistons and piston rings are considered normally wearing parts. For optimal performance of your Bostitch tool always use genuine Bostitch fasteners and replacement parts.
This warranty IS IN LIEU OF ALL OTHER EXPRESS WARRANTIES AND with respect to compressors and tools used in production applications, limits to a period of one (1) year from the date of purchase all implied warranties INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. BOSTITCH SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES.
Some states and countries do not allow the exclusion or limitation of incidental or consequential damages, so the above limitations or exclusions may not apply to you. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state and country to country.