|Air Consumption at 90 PSI - SCFM:||3|
|Air Inlet Size:||1/4 in.|
|Drive System:||Direct Drive|
|Noise Rating - dBA:||71.5|
|Operating Pressure - PSI:||200|
|Pump Speed - RPM:||2300|
|Pump Type:||Cast Iron|
|Tank Capacity:||2.5 gal.|
|Tank Style:||Hand Carry|
Do you have questions about this product?
Get answers from real customers and in-house experts with AnswerBox.
Q:can I change tires with it?
A:PSI is up to 150. You shouldn't have any problems.
Q:Will this compressor spray wall texture in normal sized rooms without having to pause every 10-15 seconds ?
A:No, I think you'll need a larger compressor and a bigger tank.
A:It should definitely take longer than 10-15 seconds to re-compress but you would also have to keep in mind that 2.5 gallons is relatively small in comparison to compressors that are used for this application.
Q:Can this product be used to inflate car and bicycle tires, or is it just for nail guns?
A:Will do a fantastic job on any bike or car tire. I have used mine to fill the large rear tires on my tractor.. So far a very good compressor
A:This compressor is capable of pumping tires.
A:I use it to inflate car tires all the time. Just be sure to increase the pressure in the line to 150 psi or so.
A:This compressor works equally well for cars and bikes. I use it all the
Q:What is the max regulated psi at the outlet?
A:The max regulated psi is 150.
Q:Can this compressor handle framing nailing?
A:Yes, the compressor has a 3CFM rating, the only issues you might run into is recompress time since the unit is only 2.5 gallon
A:Yes, this product can be used for framing nailing.