|Drum Speed (RPM):||1550|
|Dust Port Size:||4 in.|
|Max. Board Thickness:||5 in.|
|Max. Board Width:||26 in.|
|Min. Board Length:||6 in.|
Do you have questions about this product?
Get answers from real customers and in-house experts with AnswerBox.
Q:Using 220 volts what is the amperage?
A:A 3 HP 240V motor draws 17 amps and the feed motor would be about 2 amps
Q:what size is it , does it sit on the floor
A:The Delta 31-481 dimension in inches are 51.87 in height, 32.68 in width, and 48.3 in depth. This unit is a floor mount unit.
Q:Can i sand 5 piece doors With delta dualhead 31-481 sander
A:Yes, so long as the material is no thicker than 5" and 26" wide.
DELTA will repair or replace, at it’s expense, and it’s option, any new DELTA machine, machine part, or machine accessory which in normal use has proven to be defective in workmanship or material, provided that the customer returns the product prepaid to a DELTA factory service center or authorized service station with proof of purchase of the product within 5 years and provides DELTA with reasonable opportunity to verify the alleged defect by inspection. For all refurbished DELTA product, the warranty period is 180 days. DELTA will not be responsible for any asserted defect which has resulted from normal wear, misuse, abuse or repair or alteration made, or specifically authorized by anyone other than an authorized DELTA service facility or representative. Under no circumstances will DELTA be liable for incidental or consequential damages resulting from defective products. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. This warranty is DELTA’s sole warranty and sets forth the customer’s exclusive remedy, with respect to defective products; all other warranties, express or implied, whether of merchantability, fitness for purpose, or otherwise, are expressly disclaimed by DELTA.