Freight deliveries require a delivery time be scheduled and someone must be present at the time of delivery to inspect and sign for the merchandise. A representative from the freight carrier will call the phone number entered at checkout to schedule the delivery.
For freight deliveries, you have the option of adding a liftgate to your delivery. A liftgate is the device that lowers a product from the truck to ground level.
CPO recommends adding liftgate service for freight deliveries exceeding 100 lbs if you do not have a loading dock or fork lift at the delivery address. Additional charges may apply. The liftgate option will be presented during the checkout process.
Please note that liftgate service only ensures the product is removed from the truck. We recommend you have the additional help of two to four people to move the product to its desired location because drivers are not required to assist.
Requesting liftgate service after ordering may result in additional charges and delays.
|Chuck Taper:||Jacobs #3|
|Chuck to Base Capacity:||42.5-in|
|Chuck to Table Capacity:||22.25-in|
|Key Chuck Capacity:||5/8-in|
|Motor Control:||On/Off Rocker Switch|
|Shipping Weight:||261 lbs.|
|Sprindle Taper:||Morse #2|
|Table Insert:||3.75 in. x 3.75 in. x 0.75 in.|
|Table Size:||20 in. x 14 in.|
REVIEW SNAPSHOT®by PowerReviews
Reviewed by 4 customers
Displaying reviews 1-4
When my new Delta Porter drill press arrived, the key did not fit the chuck properly. After talking to Delta on the phone, they sent me a new chuck which fit perfectly the key I already had.
This is a fine drill press. Smooth, powerful; drills tiny holes as well as large. Nice finish, good looks. The left, right, and front tilt table is terrific. Speed changes are relatively easy, but it would be nice to change speeds with a switch instead of moving belts. This is a heavy duty tool, and is heavy. My wife and I could not assemble it by lifting the head in place. We assembled it upside down with my hoist instead. Worked out well.
I woul like to see the chuck a little higher off the floor. Great Drill Press I think it is a great buy.
I used this for drilling wood and metal frequently. Cable swivels out of the way. I like the removeable insert in center of cable. I like the laser accessories.
Do you have questions about this product?
get answers from real customers and in-house experts with AnswerBox.
Q:I am trying to set a up a shop and getting very frustrated that specifications and manual do not include amperage information needed for circuiting. The manuals have advice about extensions to use for various amperage but nowhere do I find amperage specifications or information. What gives?
A:This is 120V single phase, and 13.8 amps. A 15 amp breaker is sufficient.
DELTA will repair or replace, at it’s expense, and it’s option, any new DELTA machine, machine part, or machine accessory which in normal use has proven to be defective in workmanship or material, provided that the customer returns the product prepaid to a DELTA factory service center or authorized service station with proof of purchase of the product within 5 years and provides DELTA with reasonable opportunity to verify the alleged defect by inspection. For all refurbished DELTA product, the warranty period is 180 days. DELTA will not be responsible for any asserted defect which has resulted from normal wear, misuse, abuse or repair or alteration made, or specifically authorized by anyone other than an authorized DELTA service facility or representative. Under no circumstances will DELTA be liable for incidental or consequential damages resulting from defective products. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. This warranty is DELTA’s sole warranty and sets forth the customer’s exclusive remedy, with respect to defective products; all other warranties, express or implied, whether of merchantability, fitness for purpose, or otherwise, are expressly disclaimed by DELTA.