|Chuck Taper:||Jacobs #3|
|Chuck to Base Capacity:||42.5-in|
|Chuck to Table Capacity:||22.25-in|
|Key Chuck Capacity:||5/8-in|
|Motor Control:||On/Off Rocker Switch|
|Shipping Weight:||261 lbs.|
|Sprindle Taper:||Morse #2|
|Table Insert:||3.75 in. x 3.75 in. x 0.75 in.|
|Table Size:||20 in. x 14 in.|
Do you have questions about this product?
Get answers from real customers and in-house experts with AnswerBox.
Q:What is the horse power of this drill press?
A:The horsepower of the motor is 3/4-horsepower.
A:This is 120V single phase, and 13.8 amps. A 15 amp breaker is sufficient.
DELTA will repair or replace, at it’s expense, and it’s option, any new DELTA machine, machine part, or machine accessory which in normal use has proven to be defective in workmanship or material, provided that the customer returns the product prepaid to a DELTA factory service center or authorized service station with proof of purchase of the product within 5 years and provides DELTA with reasonable opportunity to verify the alleged defect by inspection. For all refurbished DELTA product, the warranty period is 180 days. DELTA will not be responsible for any asserted defect which has resulted from normal wear, misuse, abuse or repair or alteration made, or specifically authorized by anyone other than an authorized DELTA service facility or representative. Under no circumstances will DELTA be liable for incidental or consequential damages resulting from defective products. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. This warranty is DELTA’s sole warranty and sets forth the customer’s exclusive remedy, with respect to defective products; all other warranties, express or implied, whether of merchantability, fitness for purpose, or otherwise, are expressly disclaimed by DELTA.