|Duty Cycle:||20% at 70 Amps|
|Input Power:||115 Volt - 20 Amp|
|Output Power:||70 Amps / DC|
|Welds:||24 Gauge to 3/16-in Steel|
|Wire Sizes:||0.024-in, 0.030-in & 0.035-in on 4-in or 8-in Spools|
Do you have questions about this product?
Get answers from real customers and in-house experts with AnswerBox.
Q:Is the wire drive roller designed to be used on both flux-core and mig solid wire .024,.030 and .035 on the roller funished with the wg2160 welder?
A:Yes, this welder is designed to be used for the following wire sizes: 0.024-in, 0.030-in & 0.035-in on 4-in or 8-in Spools.
Q:Can you weld stainless and aluminum with flux core mode?
Q:I would like to use my wire feed welder out in the farm field. I would like to use it with my generac 7500 portable portable generator.Yes No Thank you .it very expensive to bring in a pro welder. or to remove a part just to weld it.
A:you'll want to use flux core wire. gas will move with the wind and cause bad welds. on the gen question check your amperage both low and peak surge. Do some testing before you go out in the feld with it. realize you can trash the gen if its not up to the surge.
A:you'll want to use flux core wire. gas will move with the wind and cause bad welds. on the gen question check your amperage both low and peak surge. Do some testing before you go out in the feld with it. realize you can trash the gen if its not up to the surge
Q:What do I convert a model # wg 2160 from flux core wire to mig wire?
A:Information can be found on page 5 of manual. Here is a link to the manual:
Q:can you weld stainless and aluminum in mig gas mode?
A:Yes, stainless and aluminum can be welded.
NEW Welding Equipment: The manufacturer warrants that it will repair, at no charge for parts or labor, the Welder, Welding Gun, or Cables, proven defective in material or workmanship, during the following time period(s) after date of original retail purchase:
RECONDITIONED Welding Equipment: From the date of purchase by the original purchaser as follows: 90 Day Limited Warranty.
WHO GIVES THIS WARRANTY (WARRANTOR): Campbell Hausfeld The Scott Fetzer Company 100 Production Drive Harrison, OH 45030 Telephone: (513)-367-4811
WHO RECEIVES THIS WARRANTY (PURCHASER): The original purchaser of the Campbell Hausfeld product.
WHAT IS COVERED UNDER THIS WARRANTY: Defects in material and workmanship which occur within the duration of the warranty period. This warranty extends to the Welder, the Welders Transformer and Rectifier, Welding Gun or Electrode Holder, and cables only.
WHAT IS NOT COVERED UNDER THIS WARRANTY:
Responsibilities of Warrantor under this warranty: Repair or replace, at Warrantor’s option, products or components which have failed within duration of the warranty period.
Responsibilities of purchaser under this warranty:
When Warrantor will perform repair or replacement under this warranty: Repair or replacement will be scheduled and serviced according to the normal work flow at the servicing location, and depending on the availability of replacement parts. This Limited Warranty gives you specific legal rights and you may also have other rights which vary from state to state.