|Air Inlet Size:||1/4 in.|
|Crown Size:||7/32 in.|
|Depth of Drive:||Adjustable|
|Dry Fire Lockout:||Yes|
|Fastener Type:||Narrow Crown Staples|
|Firing Modes:||Contact / Sequential Actuation|
|Jam Clearance:||Open Nose|
|Magazine Type:||Front Loading|
|Max. Fastener Length:||1-1/2 in.|
|Min. Fastener Length:||1/2 in.|
|Operating Pressure - PSI:||70 - 120|
Do you have questions about this product?
Get answers from real customers and in-house experts with AnswerBox.
Q:Looking to reattach some aluminum siding back on to an old RV that I am restoring. The crown of the staple needs to be flush with the surface of the siding, not countersunk. Is the adjustable range of this model sufficient to do this? Thanks
A:Yes, the both the stapler and the PSI from the compressor can be adjusted so the crown of the staple is flush with the surface
Q:Can 1/4" crown staples be used in this 7/32" crown stapler?
A:The Bostitch SX1838K only accepts 7/32 in crown staples.
Q:This unit indicates that it uses 7/32" CROWN STAPLES. Will it also use 1/4" crown staples?
A:Model SX1838K is only compatible with 7/32" crown staples.
Q:Were can I find 2" leg staples for this stapler
A:Any big bo retailer should carry the staples for the sx1838k.
Q:how to load staples in the pnumatic narrow crown
A:Loading instructions can be found on page 7 of the manual. Here is a link to the manual:
Stanley Fastening Systems, L.P. 7 Year Limited Warranty (1 Year for Reconditioned Products) - U.S. and Canada Only
Effective December 1, 2005 Bostitch, L.P. warrants to the original retail purchaser that the product purchased is free from defects in material and workmanship, and agrees to repair or replace, at Bostitch's option, any defective Bostitch branded pneumatic stapler or nailer for a period of seven (7) years from date of purchase (one (1) year from the date of purchase for reconditioned pneumatic staplers or nailers and for new and reconditioned compressors and tools used in production applications). Warranty is not transferable. Proof of purchase date required. This warranty covers only damage resulting from defects in material or workmanship; it does not cover conditions or malfunctions resulting from normal wear, neglect, abuse, accident or repairs attempted or made by other than our national repair center or authorized warranty service centers. Driver blades, bumpers, o-rings, pistons and piston rings are considered normally wearing parts. For optimal performance of your Bostitch tool always use genuine Bostitch fasteners and replacement parts.
This warranty IS IN LIEU OF ALL OTHER EXPRESS WARRANTIES AND with respect to compressors and tools used in production applications, limits to a period of one (1) year from the date of purchase all implied warranties INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. BOSTITCH SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES.
Some states and countries do not allow the exclusion or limitation of incidental or consequential damages, so the above limitations or exclusions may not apply to you. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state and country to country.