|Arbor Size:||5/8 in.|
|Bevel Angle Range:||-2 Degrees to 47 Degrees|
|Blade Diameter:||10 in.|
|Dust Collection Minimum CFM:||350|
|Dust Port:||2-1/2 in.|
|Max. Dado Blade Width:||1/2 in.|
|Max. Dado Diameter:||6 in.|
|Max. Depth of Cut at 45 Degrees:||2-1/2 in.|
|Max. Depth of Cut at 90 Degrees:||3-1/8 in.|
|Max. Rip Left of Blade:||7-3/4 in.|
|Max. Rip Right of Blade:||18-n|
|Miter Gauge Type:||Standard|
|Motor current:||15 Amp|
|Shipping Weight:||65.4 lbs.|
|Table Size w/o Extension:||22-1/2 in. x 20 in.|
Do you have questions about this product?
get answers from real customers and in-house experts with AnswerBox.
Q:I need to be able to cut plywood into 24" pieces. Is there an adaption to make This saw cut that width or what do you which is similar and will cut 24" widths?
A:I've not seen anything like that. But most of woodworking is about creating a jig to either modify your tool or hold the work piece safely so you can get the outcome you want. You have to find a way to do it safely and you shouldn't proceed if you're not sure about safety. You know, anyone can build anything with an unlimited tool budget. In your case you may be able to build a side extension with a homemade fence. Assuming you have a through cut, the anti-kickback spawl and the riving knife should provide a level of comfort against kickback. If you're not comfortable with this, clamp a 2x4 to the plywood and use a skillsaw. The trick is to do it with the available tools and to not get hurt! Good luck!
Q:understand this table saw does not come with a stand. so how much would the stand cost? (as per what it show in the video)
Q:Is the blade included? How many ?
A:Yes, there is one blade included. It is a10” 24-Tooth Carbide Saw Blade
A:This item includes 1 24T Blade.
Q:Does the saw come with a stand as shown in the video?
A:No, this model does not come with a stand.