|Accessory T-Slot:||1/4-in T-Bolt or Nut|
|Bit Guard:||Dual Position|
|Cabinet Material:||Baltic Birch|
|Fence Dust Port:||2-1/2 in.|
|Fence Height:||3-5/8 in.|
|Fence Length:||22 in.|
|Jointer Settings:||1/32 in. or 1/16 in.|
|Miter Track:||3/8-in x 3/4-in T-Bar Compatible|
|Router Plate:||Phenolic 8-1/4 in. x 11-3/4 in.|
|Table Depth:||16 in.|
|Table Top Material:||Phenolic Laminate|
|Table Width:||24 in.|
Reviewed by 1 customer
Displaying review 1
Comments about ProTop Contractor Router Table:
I researched several competitors models and settled on this model because others were commenting on the flatness of table and I totally agree - it is flat! This table is constructed with quality materials. Assembly was straight forward but tedious. This may have cost a few dollars more but as my father said
"buy quality - buy once".
Do you have questions about this product?
get answers from real customers and in-house experts with AnswerBox.
Q:RE: Bench Dog 40-001 ProTop: Description says "fence converts to vertical jointer" but manual says nothing about that. How does that work? Thanks.
A:When you purchased this table, you received 2 small aluminum parallels which can be inserted behind the fence you are pushing the material toward. These parallels are not square but rather rectangular, so be careful to put the pieces in correctly. The taller sides are for a rough cut and the shorter sides will then be for your finish pass.
A:The fence has built-in jointing slots to accept the (2) small aluminum